| Thread | Last Post | Replies |
|
| 1985 Mustang Brake Conversion Kit | 25 Aug 2003 01:34 GMT | 1 |
I have an 85' mustang, with 16" pony wheels that were once chromed, but seems that the elements have taken a toll on them, and need to replace them. I'd like to upgrade to 17" wheels, and change the front disks to 13" and back drums to disk. Is there such a kit out there. If ...
|
| 9" Rearend Info needed | 24 Aug 2003 22:31 GMT | 4 |
I have a 9" rearend (in another vehicle of mine) that does NOT have a Tag or any other ID on it. I was told it was a 3.91 gear set, but I'm not sure. Can someone explain how to determine what gear set is in it and if it's a Locker or not.
|
| Black Boxes | 24 Aug 2003 17:46 GMT | 3 |
I thought Ford started putting black boxes in the Mustangs. Does this mean we don't have any? http://www.vetronix.com/diagnostics/cdr/vehicle_list.html Sean
|
| Need comments on Mustang convertible | 24 Aug 2003 15:52 GMT | 4 |
i am looking to buy a used mustang convertible probably V6.... any general problems or reliability issues? thanks for the comments
|
| Oil question: syn to non-syn to blend and back again! | 24 Aug 2003 14:41 GMT | 3 |
A general question: what are the rules for changing oil types. I can never seem to get it straight...can you change from standard to full synthetic? At what mileage? Is there any point at which changing to synthetic can be bad? Can you change from full synthetic to standard?
|
| Re: 5.0 not running too good... More Info | 24 Aug 2003 13:42 GMT | 3 |
OK, so I started up my car today, without the AC on, and it did the 2500rpm rev thing! It started fine, idled for a few seconds, then revved to 2500, held for about 4 seconds, then dropped back to 1000.
|
| Clutch Whine/Squeal? | 24 Aug 2003 07:59 GMT | 3 |
Actually, I'm not sure exactly where the whine is coming from. It sounds like I'm having the opposite symptoms of the throwout bearing going bad. First, the car: 1999 GT convertible, 5speed manual. When I crank the engine, there is a whine coming from under the hood. If I
|
| 68 Mustang Converting to Discs | 24 Aug 2003 05:32 GMT | 2 |
My Mustang has 4 drum brakes. I found a '76 Granada with PDB. What must I salvage of the Granada to make the swap?
|
| 64 Falcon Futura on the Auction site.. | 24 Aug 2003 04:13 GMT | 1 |
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=2429382421&indexUR L=0&photoDisplayType=2#ebayphotohosting --->> FOR SALE <<---- 64 Falcon HT Hot Rod Project Check out the Ford Engine Heaven!
|
| SELLING YOUR CAR? | 23 Aug 2003 23:04 GMT | 5 |
List it on-line for FREE!! Small advertising fee when the car is sold to a preapproved buyer! www.uscarnetwork.com/31087 for details and to list it RIGHT NOW!!
|
| Nitrous Oxide | 23 Aug 2003 22:57 GMT | 2 |
How often do you need to fill the bottle (Assume a 10 lb bottle) under "normal" use. How much does it cost to fill each time? 01 GT
|
| Made In Detroit.com!! | 23 Aug 2003 22:53 GMT | 1 |
Here's a website I found that you can buy some pretty neat t-shirts from! I especially liked the Cobra, the gorilla, and old Super Bee design. Kinda pricey but very cool! (I just bought two.) Check it out!
|
| killer 1200 hp Turbo 2001 Stang... | 23 Aug 2003 16:40 GMT | 14 |
Check this thing out: http://www.turbomustangs.com/car_images/videos/DynoPeg.wmv
::drool:: |
| Will 15 x10 inch rims fit on 1968 Fastback?? | 23 Aug 2003 16:05 GMT | 1 |
I need to know if 15x10 inch rims will fit in the reat and if so what offset. Also I want to go with 15x8 in front what offset there. Thanks Need help ASAP, email me thanks.
|
| A Sweet Motor For The New Mach 1! | 23 Aug 2003 14:27 GMT | 5 |
Now this is the motor they should put in the Mach 1! And if Ford dropped it into the Merauder I'll guarantee its sales would pick up pretty damn fast! http://www.autoweek.com/cat_content.mv?port_code=autoweek&cat_code=specials&loc_ code=index&content_code=07874877
|