What is meant by "priming the shock absorber"?  How is it done?

I have an '89 GT that runs fantastic most of the time.  The long block is
100% stock with over 100K miles and all the air and fuel metering equipment
is totally stock.  It has a in-fender K&N filter and smooth inlet pipe, FRPP
headers, 2 1/2" Bassani x-pipe with cats and 2 1/2" MAC ...

Hey everyone I have a question for the group. I went to my friendly Chevy
dealer and was asking for this type of synthetic ATF and there were about 7
or 8 to choose from. He even went as far as to call a Ford dealership and
ask them about it and we still got nowhere. My question to ...

Need some help with ideas on fixing it?

For those who followed my earlier thread, I now have some picture sup of
the damage...
      http://web.tampabay.rr.com/theflock/mustang/spots.html
Thanks

hey folks,
I was just wondering if anyone's going out to towers Friday night (if you're
out here in the so. fla area).  I do believe I'm going out with the club and
the guys are going to see if they can get their cars in the show (though I'm

Could anyone tell me what the stock tire size and offset is on the 67
convertable. I'm looking into getting some new wheels. I really like the
look of some Chome Craigers, maby increase the rims to 16's. Anyone have any
thoughts or ideas.

I¹ve purchased underpullys for my Œ88 GT and understand there may be some
charging issues after the install. I¹d like to replace my alternator with
one that will do the job. The ALT installed now is a 75 amp unit and needs
to be replaced anyway.

Are they closed or open chambered?
Scott Williams
'66 High Country Special

I appreciate the response to the original post.  There were a lot of good
opinions offered... well, I guess ALL were good opinions.
And thanks for KEEPING it civil.
I crossposted it (as Stu pointed out) to alt.autos.ford for good reason.

Well, I called a local car shop (one of the only ones w/ a decent
reputation) and we talked for a while... they did work on my mom's old car
(head gasket).. anyway. Somebody here had me pretty scared saying it costed
him/her $750 approx. to get his/her replaced. Well... it's not too ...

Sold my '96 GT Coupe this past spring and I'm having serious seller's
remorse...  I've owned a Mustang since I was 19 (I'm 32 now) and I
feel lonely without one!  
Researching 1998 Saleen Mustang S351's and I can't find any resources

I'm going to put some speakers in the front doors on my 69fb,and I wanted to
find out if anyone knows the max depth/diameter speaker i can get in the
doors,and where to locate them best to get as much clearance from the wondow
mechanism and other stuff in the door.It seems that ...

Hey there,
 I have been contemplating dropping down the 700 bucks for the P.I. Stallion
torque converter, but before I do so I wanted to hear some comments about it.
I currently have 3.73's and a transGo shift kit.  Everyone tells me to just

I have a 66 coupe that the dash and courtesy lights stay on when ever
the key is in. Sometimes the courtesy light stays on even with out the
key. Does anyone know how to fix this? Im thinking maybe something is
not grounded?