Broke a bolt off when taking the water pump off of my 87 GT. If you are
standing in front of the car, it is the second from the bottom on the
right side. It broke where the threads and the straight shaft come
together. Based on what the previous owner told me, the threads are

Hey everyone,
I am looking for some advice on a few things to do to my Cobra. I am looking
at either 3.55 or 3.73 gears for the rear and I want to lower the car about
an inch or maybe an inch and one half. I can use some advice on both since I

Hello I was wondering if there would be conflicts if I installed
Steeda camber plates,Eibach Pro-kit springs and Mach 1 Tokico Struts &
Shocks. On a 1999 GT. Thinking about getting Bridgestone Potenza RE750
tires.

i was watchin my 9.99 blues borthers collectors dvd  last night,
theyve got a bunch of production stills on there , they have a whole
series of the Nazi pinto wagon being dropped from the helicopter all
the way to the mushroom cloud it makes on impact. pretty cool. in

I noticed some folks have URLs attached to their sigs, and we can see
their car.....anyone else have theirs online?
I'm very interested.
The Billy

Hey Gang,
I discovered this great site about six months ago and have really enjoyed
the various inputs. I haven't had anything to contribute so I've been
quietly watching.

Saw a dealer on Ebay listing a new (40 mile odo) SVT Coupe 2003, with NO
reserve and priced around low $29K.  I note there appears to be quite a
number of 2003 inventories on various dealer web pages.  When I call my
local ones they say they have them but they are not moving off ...

Mustang locks frozen shut this morning - will replacing locks help, or will
i have this problem no matter what?
I have an 88 GT. I'm thinking since its so old that maybe it freezes much
easier than a new lock.

I am going to tear down the office this morning, no more puter for a couple
of days cause everything is being turned off. Our movers will be here in the
morning then we head East.
Dang.. I hope Don is a good cook!

Whoo Hoo!
Been looking for an excuse...
DUDE! I got a Dell! Laptop that is.
Inspiron 5100 2.4 ghz 15" screen. So far, so good!

Nor for sale... I have a 98 Mustang GT.. and I've been looking around for a
kit (see subject). Does anybody know who sells them? Thanks!
-Mike

After nearly clipping a deer one night, I decided I needed to make an
upgrade to my car's lighting system.  Not wanting to clutter up/alter
the factory appearance of the front end of my car with some goofy
looking driving lights, I decided to get some recommendations for

I was given a c4 tranmission that was pulled out of a old truck. i was
told it worked. Also i got a rebuild torque converter for it. My
problem i have now is. When i put it into any gear the engine will
stall. Im guessing the torque converter is stuck is some way or

Has anyone out there successfully wired an aftermarket stereo into a
2003 Mach 460 rig?  I only care about 2003, because somewhere between
1998 and 2003, Ford did something stupid that changed everything.
I have a 3-piece harness from Crutchfield and a FAI-3 box from Scosche

Today i went to the track(racewaypark in englishtown NJ for any locals) and
had a lot of fun.  It was a Ford showdown today.  Lotta nice cars, a Mach
1...mystichrome cobra(or a cobra painted chameleon) 1 9 second GNX...couple
10 second corvettes lotta fast as fox bodies..had a good ...