My buddy has a 95 lightning(I know it isn't a mustang but maybe you can
help anyway).  He has a T76 turbo, 55# injectors, and an all stock
longblock, etc etc....  He also has a TWEECER on it for tuning.  He is
running about 13 psi of boost and has a good a/f ratio(14:1 at idle,

Thinking about buying the Mix pack which has a few cans of POR15 and
Chassis Coat Black.. My questions.. It says you can 'brush' it on.. I
plan on doing the engine bay, and undercarriage of the 67.. If I DO
brush it on, what will it look like in the engine bay? Not smooth at all

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&category=33741&item=244
3694646
What the hell? Is 220CFM enough to do ANYTHING other than restrict airflow?
-Mike

see http:// below >>>>>
ONLY GOD KNOW'S
I WILL SOME DAY
http://community.webtv.net/POODLMAN/SALEOFALIFETIME

Brent,
Good news: I found some information concerning our recent discussion.
Ford has plans for continue production of the new GT after model year
2005.

On November 19th, a day before my 21st birthday a close friend of mine died
in a car accident.  His name was Mike, he was only 20 years old.  He was on
his way to class early in the morning.  Somebody rear ended him which sent
his small car into oncoming traffic.  He was then hit ...

Hi guys and gals,
Just ran accross this image. I like it. :-)
http://forums.bradbarnett.net/index...c=1317&st=0

I lay the floors on top of the old one.. make sure it's flat and flush
everywhere, spot weld it to the rocker and tunnel, cut both at the same
time.. put it back in.. there is an inch gap.. patience is not one of my
virtues.. I have to think of a way around this dilemma.. :)

How is everybody doing?
I would appreciate everyone's advice on what to look for when buying a 65 or 66 fastback.  I regret to say that I never had the opportunity to work with cars growing up. For that reason, I certainly need all the help I can get from all of you.  
I am able to ...

I have a 1997 v6 coupe with a cassette player. I would like a CD player and
it doesnt have to be anyting special so i was think the easiest thing to do
would be just swap the cassette deck for a CD deck from the same or similar
year. I found one here

Ok, here is what happened....I have a 90' Mustang 5.0 LX Convertible.  On
the way to work this morning my car was running great...then when I got to
the parking garage my car acted like someone just turned off the ignition.
It didn't buck around or anything like it was starving for ...

For some reason, I think I have ruined the plastic covers over my
headlights.  They are becoming very foggy/scratchy looking on the outside.
I assume it might be from some rain-x or wax that I put on the plastic in
the past.  Any advice?  It is starting to bother me and for a '99 ...

Im going to be replacing the rings and bearings on my 289 and i need a
bit of info. Ive seen that the rings and bearings come in standard
sizes, and other sizes. How do i know if i need a standard size or
different sized rings and bearings?

I finally stopped laughing long enough to bring you this...
http://tinyurl.com/qi0l
Don't shoot me, I'm only the messenger.
--

MustangGuy ROCKS btw... I told him about my recent problems w/ the radiator
fan not working when it should (CCRM) & he helped me non-stop. The final
solution (I will get a CCRM from him when I have time to pull the sucker
out) was to create a manual override switch. Now I control ...