Talked to the sales manager at one of the local Ford "superdealerships" here
in Denver and he says he's heard rumblings that since the Cobra isn't back
in '05 that the Mach will be replaced by the Boss possibly with the 5.0
cammer. The motor he couldn't confirm. What other motor ...

Doany of you fine people know how/where to get the vin info on the mustang
im buying for my husband. this a annivisary gift to him (67 fb v-8 3 spd)

69 351W with edelbrock performer cam, heads.
my car has always been touchy when trying to get the timing right.
last week she ran great then one day it just wouldnt start/idle. got
it started but ran really rough and had to have foot on the gas for it

I am looking for information on the AOD.  Are all of the AOD's the
same for the years 1980-1992 in all of the cars??  I am going to go to
the local junk yard to get a tranmission and parts to rebuild for the
conversion, any help.....

I put this thing up for auction a couple of times, and it never met the
reserve, but now I am resigned to sellling it for peanuts.  Genuine Ford SVT
product, new old stock, never installed.  Fits Fox Body style Mustangs and
Capris.  Ties the front end together for tighter handling.

I have been told that the 351C engine has an oiling system issue and that it
is common for the rear mains and rod bearings to have oil starvation.
I have also read that there is a fix for this by running a oil line from the
sending unit port by the oil filter to the rear oil galley ...

i can't remember if the factor ones were sealed or not but the passenger
side got condensation in it, so i replace them with a set of after market
diamond clear cobra style, but the same thing is happening to the passenger
side again, and they have a little black tube coming out of ...

A tribute to 40 years of performance, Mustang GT-R concept celebrates
famous "Yellow Mustangs," features 440-horsepower "Cammer" crate
engine and athletic handling.  Retains 85 percent of 2005 Mustang's
body components and reinforced versions of the race-inspired

Here's a short video of my buddy's 63 Falcon Dragcar's 1st breath of air!!
-468ci 750+HP
**DUW**  only 3MB.
www.s95371106.onlinehome.us/videos/ItsALIVE.WMV

I am looking for new door skins (or entire doors) for my latest project.
Who would you recommend for the highest quality metal products???
Also, I may need two new headlight buckets.  Again, who can I trust to send
me quality parts.

Oil Change instructions
Oil Change instructions for Women:
1) Pull up to Jiffy Lube when the mileage reaches 3000 miles since
the last oil change.

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&category=33701&item
=2472582626
Don't know where the got them, but here they are!

 I've seen a few places for around $50... seems a little pricey.  Any
thoughts?
 Later,
  Shaun!

The Tach in my 89 5.0 LX just started acting up today.
The needle sorta sticks as it climbs and will NOT go past 4800RPMs.

BTW, this hapened after I changed the thermostat and reset the timing.

I have been watching the earlier thread about cheap mustangs at certain
dealers. I was wondering if anyone has seen any good deals as of late, and
if so would you have a link to the dealers site or the newspaper ad? Around
me they are selling plain Jane GT's for 23 to 24 grand, and ...