A regular on this newsgroup has a picture of a red 1994-1998 mustang with a
2000 cobra r splitter.
He sells them for a couple hundred bucks.
looks nice but i can't find the website again.

I am looking for a good parts source for 1989 mustang GT convertible parts.
Espeacially power window motors.
I need a motor for one of the rear windows.  Thanks,  Howard

I am a proud new owner of a '03 Cobra Vert - silver:
1) I can hear a sound coming from the center console area that sounds
like the fan (i.e., heat, a/c)  is always on (it's not) - what is this
sound? I can hear this sound best at idle (is this the supercharger -

There have been at least two posts in this group about new Mustang Gt's
selling for $16,000. I would like to know where?
Al

The other day, prior to getting my Mach-1, I was driving my GT, doing
about the fast lane of a local highway and I look into
the rear view mirror to see someone in a cheapy econo-4x4 fly up
behind me,

I drive a 99 Mustang...3.8...no mods...just something to get to/from work
quickly.
I'm not only on "newbie" level for Mustangs, but for all things mechanical
as well, so I'll try to draw from the memory of my conversations with the

I have a '66 convertible with a 200ci.  I would like to drop in a 289
eventually, but time and money are very rare commodoties, as many of
you probably know.  I want to keep the 200ci for now, just so I can
drive the car.  Hell, that's why we bought them right?  It's a little

I have a motor, trans, exhaust, rims, rear end, callipers, rotors etc.
This is out of  2001 GT with under 10,000k on it.
This was my car. The car had an interor fire so I have no interor parts.
I bought this back from the insurance company and was going put in something

I have a 2001 V6 5 speed with 32,000 miles on it.
Upon coming to a stop I usually shift down to apply both engine and foot
break. Recently the engine acts as if it will stall out. Mind you, I only
again started using the car, it was in storage for winter. ;-) Anyway, the

CHECK OUT THE COOL FORD MUSTANG GT-R CONCEPT WITH 500 HORSEPOWER!!
THIS CAR IS ABSOLUTELY GREAT. BUT IT'S ONLY A SHOW CAR!!
FOUND ARTICLE AND PICS ON :
http://www.carnews.nu/modules.php?name=News&file=article&sid=95

This is a little off topic for this group but.... I just finished
building an experimental plane powered by a 347 all aluminum small
block Ford. I am running a holley red pump upstream of my mechanical
carter pump feeding a Holley 500 cfm two barrel. At idle my fuel

Just letting anyone know who may need this, I'm getting ready to eBay the
trac-loc diff I have.  It's a 7.5" 4:10 geared unit in good shape.  Just the
gears and trac-loc assy, no housing.  Have pics if anyone wants a look.
Thanks,

Check out this monster!
http://www.detnews.com/2004/autosinsider/0404/04/c10-111614.htm
Patrick
'93 Cobra

This is scary, folks!  
-------
By ANDREW LUU
Canadian Ron Shortt is a far cry from the fast and furious type: The

I changed the oil for the first time in my fiancee's Mustang over this
weekend. Previous to this, she had always taken it to the dealer. I
prepared by doing some web research but I could hardly find a post
that said where the drain plug is located. All the posts were about