Local guy that I know calls me up.  He's been looking for a Miata.  He calls
me today to tell me he found a car.
Now, it was dark and rainy, but they drove to a shopping center to see the
car under some lights.  He said from what he's seen, it's in pretty good

While I was installing my shifter this past weekend, I had the
opportunity to really notice how cheesy that cheap plastic interior
looks and feels.  My father-in-law has the same complaint about his
'vette.

 My 5.0 LX's exhaust tips are whipped and need replaced.
I'm pondering moving up to 2.5" or maybe 3" O.D. pipes (for looks).
Although, I'm really like the sound of my car's exhaust as is, I'm
wondering what the effect will be if I do decide to go to one of the larger

http://www.gm.com/automotive/gmpowertrain/engines/ecotec/news/press2.htm
"FWD Cavalier, Sunfire mark change in direction for drag racing With a
remarkable 600 to700 horsepower (depending on the class in which the car is
competing) from only four cylinders, the Cavalier and Sunfire ...

Not exactly what I wanted, but I couldn't beat the price.
Two Futura Ultra Z's, 255/50/16 = $80 each
New Rack & Pinion = $80 (and I didn't have to pay the $120 core).
They go in tomorrow as well as getting the alignment done, new alternator,

OK...  I just got my Bullitt back from the dealer... I took it in because it
was creaking when I would go around turns and such.  They gave it back all
fixed and ready to go.  I ask the service guy what was wrong with the car...
he said, "oh just some subframe bolts were loose."  ...

What is the widest tire that will fit an 89 5.0 LX that has a TurboCoupe
rear-end ???
Anyone know with certainty ??
I know 275s will fit with the OEM rear-end, but the TurboCoupe rear-end is

I'm considering the new Cobra, however I had a 96 Cobra that was a real POS,
mainly the transmission.  The 96 clutch required 40lbs to disengage by the
time I got rid of it at 11,000 miles and three dealers said it was "in
spec".  Sure, pull the other one now.  Has Ford gotten it ...

Does anybody know the Throttle Position
Sensor Voltage Setting for:
1991 Mustang 5.0 L and
1987 Mustang 2.3 L

If you own a 87-93 Stang and have NOT yet upgraded the front brakes, I URGE
you to do this CHEAP MOD ASAP!!
I recently installed a pair of rebuilt 1990 Crown Vic Police Interceptor
Calipers along with Performance Friction Carbon Metallic pads.

I just met a guy (at a gas station) to sell a driveshaft to this AM.
He pulls up in this $100,000 VW Phaeton with a V-12 !! YES !! A V-12 !! NOT
a Inline -12, but a V-12 !!
6.0 Liter, 395HP (conservative), adjustible air ride suspension that lowers

I recently purchased my first car ever- a black mustang gt-1997,
manual. The problem i have is that when i start off in first gear, if
i dont rev it upto 2000 rpm soon or if i let the clutch out too early,
a rattling sound comes from the rear of the car - it sounds as if one

Last year when I bought my 85 GT I did a complete Tune up on
her..............7 out of 8 plugs came out with ease............when I got
to the last one it was stuck.  Now how in the heck do I remove it without
busting it.  I am really scared this thing will break.  If it does break,

1966 mustang coupe 289, white white vinyl roof
very clean lots of new parts, dashpad, headliner,carpet,ect
will also take trade for chev camaro, any year
or 4weeler,

Kate hon, or anybody else in the know. :-)
I want to refinish the door panel inserts (ya know, the ones with the
mirror knobs) as mine are chipped and scarred around the edges. I
figure I can use the new Krylon fusion spray paint. But how do I smooth