Our local Ford dealer had a 4 hour preview of the new Mustang today. I went,
I saw, I was disappointed:(  I expected a completely redone car, not a mild
makeover.
Al

i have a 93 mustang lx with a 5.0. i drove ir eariler today and it was fine.
i let it sit for a few hours then went to drive it again and my battery
meter was way low. i had the guy at autozone check my altanator with the
machine. it said no output check wireing. could it just be my ...

Hello RAMFM!  
Wow, have I been gone forever, or what?  Parenthood....some of you
understand.  :)
I have been lurking a bit the last few weeks...waiting to make my re-

I bought the car a year ago and was "told" it had a 93 Cobra long block and
"A BIG CAM" in it.
I'm REAL curious as to what the specs (ball park) may be on it.
See sig below.....

I'm considering adding some auxiliary gauges in my 90 GT, and have seen
plenty of Autometer and VDO.
There's the Ford Motorsport as well.
My plan at the moment is to add a fuel pressure and trans temp (my car

I'm in the middle of a ground-up restoration on a 67 Coupe/289.  Will be
putting an Edelbrock carb/intake/cam package in the engine and will be
porting, balancing & blueprinting.
My knowledge of auto mechanics is old school.  The last set of headers I

I have an 89 GT.  Work in progress.  I have installed a BBK H pipe, and
Flowmaster 40's.  Now I need some headers!  Any good advice?  Thanks,
Howard

www.saleenstangs.com is your new FREE Ford Mustang, Saleen and Ford
Cobra enthusiast site.
There are NO banner ads, ever, anywhere.
Presently we are working on building the most advanced

I saw posted somewhere that the door panels from a 1990 convertible
are different than any other Mustang body style of that year.  Does
anyone know if that is true and if so, what the difference is?
Mike Chippendale

I got back Saturday night after attending the 40th Anniversary Mustang show
in Nashville.  It sure was a heck of a birthday party!  Trouble had the
honor of being one of three cars out of 4,000+ to be pulled out for a
magazine photo shoot.  While the photographer was getting his ...

Okay... the 98GT is getting some money thrown at her this week and
next in order to get it ready for our local message board's annual
convergance upon Beech Bend Raceway.
One of the things I want to resolve is this damned creaking sound that

I've left my '96 GT with a mechanic friend while I'm away for one
month, so that he may make some repairs to it. One of the things I
needed diagnosed(though I haven't told him yet) is this ticking sound
when I put ever so light pressure on the gas pedal. I'm guessing it's

Good tough series... See ya next year.   StuK
GO LEAFS!!!!

I have an 89GT auto trans.  I want to be able to shift it manually.  I see
there is something called a C-4.  Will this
allow me to shift thru all the gears manually, and how hard is it to
install?  Howard

recently i was also told that if my mass air flow sensor was dirty i would
get bad gas mileage. is this true without sounding like a total idiot and
how do you clean it.
       thanks