I have a 94 GT, is this worth the hassle to do it myself or should I just
take it to a shop and have it done?  I'd have to buy any tools that are
specific for the job, and of course, the refrigerant.  What would the cost
be, on average, to get it done at a dealership vs. doing it ...

    i have 1991 ford mustang lx hatchback and would like to beef it up
.
    if anyone has ideas on where i can get a 5.0 literengine for my car
get back to me at,

Does anyone know how to aim the washer jets on a 2004 Mustang?  Mine spray
below the wipers, so the window is never getting wet.
Thanks,
Larry

The car still shakes starting at 45-50 mph. It is worse when I push the
clutch in and coast. The vibration lessens almost to the point that it
disappears. Okay, this is everything I have done so far.
New shocks

The Mach 1 hood is great, but I noticed something while browsing at the
local dealers -
Before you drive off in your new Mach1, check the plastic(Vinyl?) pieces
that make up both the rear pillar cover(area that causes your blind

There is an air breather on the 89 GT.  It is under the PCV valve.  Any
ideas how to get that out?  I have a new grommet and PCV valve.  What do you
use,  a hook?
Thanks

I have a stock '91 5.O LX HO EFI.  Only mod is K&N EFI Air Filter.  I want
more off the line and mid range, and a deeper growl would be nice :-)  Not
bothered with top end - just want a street sleeper.
Which one would you recommend next?  Chip (which one)? Exhaust? Fuel Pump?

Quick history; laptop w/wired NIC, home DHCP LAN, everything works fine and
I could connect into DHCP LAN at work, surf the net, but of course workgroup
was set for home so I couldn't see other computers, didn't want to anyway.
Now; installed a wireless router at home, installed ...

If anyone out there has a carfax subscription, could you please run one for
me?  E-mail me at misterSPAMSUCKS@SPAMBASTARDStoughguy.net  remove caps
Thanks

One of the best Knotts Berry Farms Ford shows IMHO.
Many of the cars I've seen there before and a whole bunch of new ones
showed.
The new 05 was there, and it is stunning! Some of you who criticize it, need

When did the Tremec first start being used in Mustangs ??
When did the 6 Speed start being offered ??
What are the IDs for them ??

I am just finishing up on a rebuild of the 289 for my 67 Cougar drag
car, suggestions comments welcome. Here are the specs.
67 289 +.030
Keith Black KB116 .200 Dome pistons

I was going through junked mustangs and my local wrecking yard,
looking for various things, when I came to a back hatch that was
locked shut.  I wanted to check the spare tire compartment for tools
and things that are commonly left behind, and remembering that

For the Mustang Rally this weekend?
Just curious.
Jason

For those of you who could not make it to Nashville for the Mustang's
40th Anniversary celebration, here are some pictures from our local
message board's photo gallery.
http://www.tennesspeed.net/gallery/showgallery.php?cat=525