We have a little discussion here, and the question is as in the subject: How
much does a 1969 Mustang with a 302 V8 and automatic weigh?
Regards
Tomas Kristiansen

I've got an 89 Fox body (hatch) that I'm going to retore oth body and
mechanicals on
I see there are a number of fiberglass panel manfg's out there.  Who makes
good stuff and whose is junk?

What do people recommend for:
- mechanic's gloves
- nitrile gloves for parts washers/oily stuff?
Thanks!

i need help i have a 1966 289 2 brl. and it overheats , all the time
it has new core heater, new rad and new water pump
what could it be
Thanks Yves

I'm have a 88 5-Liter and i want to buy a air/fuel gauge. i have done some
mods to the engine but i wanted to know what is the correct ratio?
RjA
88 LX 5-Liter

Hey gang,
               Okay so I put everything back together on the 84 gt.  now I
pulled her out of the garage today and timed her and she was purring like a
kitten.....after about 5 minutes I was hearing a deep thumping sound like:

I have a 99 GT (130k miles) that started making a noise right around
the front of the engine by the harmonic balancer. The noise sounded
like the timing chain was hitting the front engine cover. It got
louder and louder as I drove it.

Mustangs, Tbirds, Cougars, Linclons, Gran Marquis,
http://www.southernspeedometer.com

By Eric Mayne
Responding to the auto industry's escalating horsepower wars —
including Chrysler's popular Hemi engine — Ford Motor Co. is
developing a larger, more powerful V-8 engine for its top-selling

I'm going to be installing a Black Magic electric fan in my 88 Mustang GT.
Where is a good place to pick up the 12 volt ignition source under the hood?
I would rather not try to hook it up under the dash, but if that is the best
place then that is what i will do. Also i can hook it ...

An mechanical polisher to wax and polish their cars? If so what type?
Dave
96 GTS with a few goodies

I'm selling my 1973 Mach 1 Mustang. I'm located in New Jersey. Will
not ship. It runs ok, Looks ok, needs some work here and there.
Drivers seat is broken, some rust, Heater core leaks a bit under dash.
I've had it about 4 or 5 years, and have never had a problem with it.

I own a 95 Mustang LX... I have done many exterior mods  (added a
spoiler, fog lights, and such), now I want to do engine mods.  Anyone
have any suggestions on getting more HP out of a stock V6 for little
money and little changes to the original engine?

I am looking for all the posibilities for a 1965 mustang fastback.  If
you use the newer style 17 inch rims it requires the use of spacers
and requires you to roll the inner fender, this does not sound like
the right choice.  I am looking for other choices that will increase

My buddy is having a hell of  a time getting brake fluid to the rears.  He's
replaced the wheel cylinders and did have rear brakes.  Our thinking is the
distribution block plunger isn't centering and I wanted to know from the
group if we are barking up the right tree.