Ford - Ford Mustangs in all their flavours

Thread preview

Thread	Last Post	Replies

Old Dominion, Summerduck, Capitol Rwy, Maryland Intl Raceways	22 May 2004 02:27 GMT	7
Anyone near these dragstrips? I just got a week's notice that I'll be spending a little time in the Quantico, Virginia area. I'll most likely be available the weekend of May 22nd/23rd. I'd like to hit DC one day, but go see some racing another day.
'66 Coupe - opening trunk without key	21 May 2004 19:42 GMT	2
Okay, I lost the key and am prepared to go in through the back seat. Is there any trick to popping the trunk, or do I just unbolt the lock? Thanks in advance.........
The Next Cobra Mustang Needs A 427!	21 May 2004 17:45 GMT	1
70 pounds lighter than a 5.4...Maybe there is a possibility of V10 Mustang. ---------- "Witness the Ford 427. This possible future model has a rather
Hunt for low cost 04 GT	21 May 2004 17:13 GMT	5
Found a 40th anniversary with leather seats, it's a 5 speed. $19,435, no traction control. I was looking for white or silver:( I'm starting to understand how this works. If the dealer has the car over 120 days the deal gets very good. I'm finding discounted Cobra's, but they
Ford GT Puts Viper On the Trailer	21 May 2004 14:24 GMT	33
Viper - 12.07 @ 120 mph Ford GT - 11.69 @ 122 Test Summary: Dodge Viper SRT-10 Base price: $80,995, Price as tested: $84,795
Re-wiring	21 May 2004 02:38 GMT	5
On a scale from 1-10 how hard is it to re-wire a 65' mustang?
Racing Junk	20 May 2004 17:38 GMT	1
Looking for Racing Junk...check this out: http://www.racingjunk.com/?aid=31406 Signature I switched to Vonage for my local and long distance phone service. Click
87 GT with T-Tops - i have a few questions.	20 May 2004 16:19 GMT	6
i am looking at one this week. and the seller has no idea about the details of the car. i could use a few tips from you guys: 1. the seller tells me over the phone that the car does not have any A/C - is this possible on a GT?
94 mustang aod 373 gears?	20 May 2004 10:43 GMT	8
I am going to pop in some 373 gears in my 94 'stang. It has the automatic with overdrive, and a shift kit. My question is, with the new gears I am thinking my shift points are going to have to be changed. Does the gears shift off the computer, or off a speedo gear?
351c Engine help PLEASE!!	20 May 2004 06:00 GMT	14
I have a little bit of a problem. I just finished building and installing a 351c in my 72 Mach-1. Set timing to 8 Deg.BTDC initial with a Accell Vac. advance distributor and a Holley 4150 Vac. secondaries carb. It idles and revs fine in park but when I drive it as soon as I get on ...
Torque Box reinforcement question	20 May 2004 03:46 GMT	4
I was thinking of getting some Torque box reinforcements for my 88 Mustang GT, anyone have any advise on this? Do the reinforcements have to be welded? How difficult of a job is this?
Finally Installed My Weld Rodlites	20 May 2004 03:42 GMT	9
The pics suck but I was in a hurry... so sue me. :) I'll post up some good pics as soon as I get 'em shot. I went ahead and went all out on the install. I ordered the correct ARP 3" studs for the rears (they were relatively cheap). The fronts,
Couple questions...	20 May 2004 03:41 GMT	10
Yesterday a freeze plug went out on me on the 65. the one in the head on the drivers side. I have been told I need to pull the head to do it properly. I am not happy about this but I guess it will have to happen. Here are my questions:
Wanted to buy	20 May 2004 03:09 GMT	3
Chrome rims for 1966 mustang coupe Signature www.countrydesign.net
TECH: Suspension Upgrades - 02GT	20 May 2004 02:49 GMT	4
I've got the itch to up my suspension this weekend on my Black 2002 5sp GT Convertible. I've had a new set of Steeda sport springs in my garage since October, and I'm puttin' them on. I don't have any shocks/struts though, and I want some. I did Tokico blues in the