On May 30 at the Kimberton Fire co fairgrounds in
Kimberton Pa. Anyone plan on showing up?
Dave
Or Carlise on June 4,5,6, ?

Hello I was wondering if I could any opinions on some suspension
setups for a 1999 Gt.
I was wondering if I should go with Koni red's with eibach prokit
or tokico lluminas with eibach prokit or the eibach pro system?

I killed my battery last night, don't know how, the lights were off.
I let the charger sit at 6 amps over night, this morning the batt put out
13.22 volts.  I attempted to start the car but the fuel pump didn't pump. I
can hear the relay clicking. The PCM and fuel pump relay are ...

Are the 03 and 04 Cobras the same? did ford tweak anything for 04? what are
the final production numbers of the 04 Cobra?
rja

My son is contemplating purchase of a 1989 Ford Mustang LX with a
L4-140 2.3L SOHC engine as his first car.  The owner, over the past
year, replaced the water-pump, thermostat, hoses, belts and had a new
core put in the radiator.  The engine now has a blown head gasket, so

Does anyone have any experience/advice about using aftermarket O2 sensors
vs. OEM sensors? Is there a brand preference if not OEM?
Thanks
Richard

JS mentioned he was using the "61 cubic inches" in a forumla to determine
engine size/litre.. what IS the forumla? (Sorry if I worded that wrong, JS).
-Mike

The Competition Report
We already have the WRX/STi and Evolution, so next up... the Skyline
GT-R.  Yep, looks like it'll arrive in 2007.
Patrick

Is it true that a t-5 worldclass trans can only support 300 HP??

I would like to remove a taillight lens from the assembly.  I have an
assembly with a good lens and another with a good housing.  I'd like
to take the two lenses off the housings and make one good taillight
assembly.  How are they removed?  I read one post that said they pop

My sister has a 2000 model Mustang Convertable that has a thump sound that
seems to come from under the driver's side floor board when she takes off or
hits a bump.  They have looked all over under it and can't find anything
loose.  Any have any idea what this sound could be coming ...

98 Mustang GT
I re-gap the plugs... stumbling goes 100% away for 3-4 days.. then comes
back. I regap (1-2 are off??) and it's gone for another 3-4 days...... WTF?
A never-ending cycle. Any ideas? Thanks. Oh..using Ford Motorcraft Platinum

     I just installed some Flowmaster 40's  on my 89 GT
Convertible.
I live in Clearwater Florida.  We don't check emissions.
I want to remove the cat's and just install an H or X pipe.

I have a 2kgt and im about to buy tires. Im looking at the eagle f1 gsd3's.
I want to get 315\35\17 for the rear and 275\40\17 for the front, my rims
are 10.5 and 9. Im trying to find out if anybody has tires this wide on a
later model mustang wthout altering the car any. Dont want ...

  Old Ma Jet has relocated to my general neighborhood for her
retirement years. Oh joy. I told her there is no way in blazes that I'm
fixing or maintaining her '87 Tie-yoder Cee-likka. So it was off to the
Phjordhh dealer to look at new stuff.