Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
HomeAnnouncements
Discussion Groups
By Brand
BMWChevroletDodgeFordGMHondaLexusMercedes-BenzNissanPeugeotToyotaVolkswagenOther Brands
By Topic
4x4 CarsRVsDrivingMaintenance & RepairCar AudioCollectible Cars
Country Specific
Australian ForumsUK Forums
ArticlesAuto InsuranceBuyingCars & TechnologyMaintenanceMiscellaneousSafety
DMV Resources
Related Topics
MotorcyclesBoatsMore Topics ...

Car Forum / Ford / Ford Mustang / June 2004

Tip: Looking for answers? Try searching our database.

ThreadLast Post  Replies
Tires and wheel size and manual26 Jun 2004 02:08 GMT1
I could use some information on the original tire size for my 68 v8 289
mustang, a/c, automatic. and what is the recommended service manual for this
vehicle. thanks Ed
[Q] Mustang LX Headlights/Fog Lamps Switch25 Jun 2004 21:38 GMT8
Does anybody know where to buy this type of switch. I have searched
eBay a few times with no luck.
I would like to add fog lamps to my car, is it possible to do it using
the factory wiring?
Adding a Sub-Woofer25 Jun 2004 16:52 GMT7
Is it possible to add a sub woofer to a stock stereo system.  If so what is
the best of sub and how is it wired?  I have a '02 GT convertible with the
Mach 400 system.
2005 Mustang GT engine - superchargable?25 Jun 2004 16:02 GMT3
From what you all know of the new 24 valve 4.6 they are putting in the new
Mustang GTs, does it sound like it would be superchargable? I realize this
may be a grey area.
Like if you compare the ?aluminum? 4.6 put in my mustang (1996) vs. the
Hydrogen Powered Shelby Cobra25 Jun 2004 15:53 GMT3
Here is an interesting article:
http://www.pistonheads.com/news/default.asp?storyId=8589
No Blinker's/Hazards (what gives)25 Jun 2004 06:18 GMT8
Helping a buddy out here. '69 Sportsroof, old blinker module, no blinky; new
blinker module, no blinky. Where do I start looking?
Signature

Scott W.

'67 Rebuild problems. Anyone Use Solid Mounts?25 Jun 2004 04:56 GMT2
Rebuilt the 289 and swapped my C-4 for a '84 T-5 in my 1967 mustang and I've
run into some problems. For some reason my engine sits too high that the fan
comes less than half an inch from the top radiator hose. I don't understand
how this happened since I compared the old motor ...
Idle problem after exhaust install 25 Jun 2004 04:20 GMT3
Idle problem after exhaust install
----------------------------------------------------------------------------
----
Hi Guys
What do you think this stang is worth25 Jun 2004 01:24 GMT9
This is an '87  5.0  5 speed stock Mustang with 42,000 miles.
What do you think it is worth?
http://paintedover.com/uploads/3/stang4_copy.jpg
96GT susp. ?25 Jun 2004 00:15 GMT2
My coupe seems to have "settled" an inch or two...understandable after nine
years and 53K miles. I have to jack 'er up slightly to get my oil drain pan
to fit underneath. Not original tires certainly, but same size/profile. I
don't notice any bouncing/flouncing around or real ...
Attn:  Clark Kent:  Pics of your car are online now24 Jun 2004 22:42 GMT8
Here are some pics of the car that you sent me, any coming to me of the
motor??  I know it used to look great but you did some more stuff to it,
i'd love to see it.  BTW, the car looks absolutely fantastic!  I love
that color!!
Thanks, Musttanguy !24 Jun 2004 20:30 GMT4
You know why :)
93' Stalling24 Jun 2004 19:20 GMT5
I have a 93' Ford Mustang with a four cyl. with eight plugs and fuel
injected...when I start up and start to drive with a cold engine the car
will want to stall and it sounds like its also back firing...any idea's...
also would a bad map sensor affect transmission shifting....thanks ...
91 Conv. Hazard Light Switch24 Jun 2004 19:17 GMT1
I have a '91 GT Conv. The hazard light switch is missing the inner back
light and I can't remember what color the lamp should be when the headlights
are on...all other switches have green back lights, but I seem to remember
the emergency flasher having a red light...can anyone check ...
[Q] Nos (Nitrous Oxide Systems) Bottle Dimensions24 Jun 2004 14:17 GMT2
I am a Graphic Design student, I am currently doing  a project about a
product package. I chose Nos as the product but since we need to add a
realistic finish to the presentation I would like to know the
dimensions of the bottle and the label. Would any Nos user here be so
Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 May, 2004
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread



©2008 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.