| Thread | Last Post | Replies |
|
| Thinking about putting in a laser jammer...few questions... | 23 Jun 2004 01:02 GMT | 10 |
I was wondering if anyone has installed one of these in their Mustang. I have an 03 GT Conv with a grill delete kit. I was either thing about putting it (Bel Laserpro) inside my grill delete on either side, behind the pony or below the front plate inside the bumber next to each ...
|
| Electric trunk Release retrofit on 69 | 23 Jun 2004 00:29 GMT | 11 |
I want to retrofit an electric trunk release to my 69. I've seen them on eBay,but so far not successful in getting one. Does anyone know what later model(s) of Ford cars they come from so i can try to find one ? Apparently they bolt right in place of the old manual one.
|
| 90's Aod wire color id | 22 Jun 2004 23:05 GMT | 4 |
I am putting an AOD in a 68 coupe from a 90's Stang. The four wires coming out of the tranny are a different color than the ones from the firewall. I have the literature for the 68 but not the 90. Can anyone tell me what is what on the tranny?
|
| Of o2 sensors, bad wire, and a leak-down test... | 22 Jun 2004 21:55 GMT | 21 |
I have a '96 Mustang GT convertible, with the 4.6 V8 sohc. The 'Check Engine' light came on for the first time last Friday while my wife and I were on vacation. Nothing was amiss, just the light. Gas cap was tight, everything under the hood 'looked' alright.
|
| Wheel Offset for '71 | 22 Jun 2004 09:33 GMT | 5 |
Hey all - Can someone give me the proper backspacing for a '71 with a 15x7 wheel? I am going to look at some used Cragar's and the old man doesn't have a clue what I need.
|
| 351C heater hose tube | 22 Jun 2004 08:27 GMT | 3 |
I recently had my 351C block and heads vatted and just noticed that the heater hose tube that sticks up out of the block has been eaten away by the vatting process. a) How are the tubes installed?
|
| 1966 mustang belly pan Question | 22 Jun 2004 05:41 GMT | 1 |
New Here A family member recently took on a 1966 mustang and found out that it needed a belly pan(floorboard) replacement. Is there a website that shows or explains what we are in for??
|
| Ok...roll call. Who has met who in here... | 22 Jun 2004 04:08 GMT | 27 |
Me = Don Manning; Midwest City, OK I have met in this order: Tom Burgess, OK (see quite often) Jim Chodrick, OK
|
| $3.00 a gallon for gas!!!! | 22 Jun 2004 03:52 GMT | 16 |
On the news last night they showed a station near the beach somewhere that had 87 octane for $3.03 a gallon... I fear what the price is gonna be next weekend (This is San Diego area)
|
| Strange freon coming out under hood | 21 Jun 2004 20:48 GMT | 1 |
Ok group this is a strange one for sure. This is a 1999 Mustang Convertible with a V-6. My friend just bought it and she said it made a funny smell and sound. I just got home from going for a ride with her and while we were driving w/ the a/c on all of a sudden it was like ...
|
| Oil question | 21 Jun 2004 20:39 GMT | 26 |
I was wondering if anyone would know if using 5W30 instead of 5W20 in an 02 mustang would cause any adverse problems. I am going to go synthetic and all the one store had was 5W30 and the owners manual says to use 5W20. Thanks, Ed.
|
| Anyone with a 99+ 4.6 auto Stang? | 21 Jun 2004 20:29 GMT | 5 |
I'm looking at a 99 GT 35th anniversary Mustang. I don't know jack about the 4.6 engine. To make things "worse" its an automatic. I have a few questions for anyone that owns one. I know it won't be a rocket ship, but how are they performance wise?
|
| Loud wind noise at driver side window | 21 Jun 2004 18:28 GMT | 3 |
I bought a used 1996 Mustang GT recently, and at high speeds beginning at about 65 mph, a loud wind noise develops at the driver side window. The noise gets progressively louder the faster one goes. At 100 mph,
|
| Nu-Finish | 21 Jun 2004 14:38 GMT | 3 |
Saw a commerical for Nu-Finish. Is it really as good as it claims? Does it hurt anything? Thanks, Carl
|
| R134 convert | 21 Jun 2004 13:02 GMT | 12 |
My 93 5.0's A/C is getting a little tired. Just wondering if anyone here has converted an R12 to an R134? If so, would you recommend it, or should I "fuggettaboutit" I've gotten prices ranging from $135.00 to $300.00+ Thanks
|