i jacked up my '04 mach 1 this morning using a floor jack and jack stands. i
wanted to jack it up and get underneath and familiarize myself with everything.
i couldn't get the `doughnut-like' area beneath the springs to rest
comfortably in the cradle of the jack stand. sorry, all, ...

Hi again! (lots of questions today..)
I addition to the 1991 Mustang, we also have a 1998 Mustang conv. with the
3,8 V6. After installing a larger throttlebodykit from BBK and a BBK cold
air intake (which goes in the fenderwall), it's started to give this

Hey Guys,
I have a 1985 Mustang GT, 5 speed.  Yesterday I took it out for a short
spin.  Parked her and then maybe 10 minutes later I could hear noises coming
from it like a gurgling.......like water squeezin out through a tight

Could someone tell me what rearend gears I have by this information? It's a
1991 Mustang 5.0 LX with an AOD, and it's running around 1400rpms at 55 mph
(in overdrive). I suspect it's 2.73, but I'm not sure.. If so, what would be
the best gears to swap it with? I want to maintain ...

I have found 2 distributor cap wiring diagrams (see below) for a 1993
Mustang 5.0?
Block   |         Cap Dia. 1        |       Cap Dia. 2
-------------------------------------------------

Might be signs the constant solid growth in the SUV/big pickup market
is starting to show some stress cracks.  Read on... and then take the
poll.
----

the code 0301 is coming up. my 98 mustang started idling and running
rough. i replaced wires and plugs to no avail. any ideas?
98 gt vert

What is the recomended lub for the rear end of a '91 GT? How do I know if I
have Traction-Lok?

I've got 3.73 gears on the way and 15" wheels on all 4. What can I use to
correct the speedometer? Thanks in advance.
-Mike
98 Mustang GT

I'd like to see this be an industry trend!
-----
Chevrolet said happy holiday to its legion of Corvette lovers when it
announced unexpectedly lower prices for the all-new 2005 Corvette

94 conv GT power window RH side.
The window stops as it goes up and needs manual help to get it all the
way up. I've replaced the motor and this has not fixed it. The window
vibrates when it tries to go up. There is a vertical streak on the glass

During a weekend Mustang (200 CID) project I decided to change the plug for
my voltage regulator. I noticed something funny. The plug has four "female
connectors" but only three of them have wires in them. My replacement plug
has wires in all four "female connectors". Now I am ...

My son has a 1994 Mustang(GT). It runs well,Headers,dual exhaust no cats.
His A/C is cold ,heat workstoo.
The problem is the air only blows threw the defroster,no matter if it is set
on heater,vent,etc.

My '66 is stalling after getting the temperature up to about 1/2 way on the
gauge.  I changed the fuel filter, oil, spark pluggs but it still stalls.
Please help!

I  replaced the rear wheel bearings on my '91 about two years ago with the
repair bearings. These have the seals built in unlike the stock originals.
Evidently I had a slow leak of rear end fluid through these seals since I
replace them. Is this common? Or do certain manufactures ...