| Thread | Last Post | Replies |
|
| Body roll | 22 Aug 2004 22:35 GMT | 21 |
P!sses me off... Any idea on the single best mod to get rid of it on a Fox body? Thanks all! Brad
|
| rear end gears in a 2001 mustang GT (5 speed) | 22 Aug 2004 16:21 GMT | 2 |
I've been googling without much luck for a while.. what rear end gears come in a stock 2001 mustang GT? what kind of impact in driving and performance would be achieved by replacing them with 3.73's or 4.10's ?
|
| Overhaulin... | 22 Aug 2004 16:18 GMT | 36 |
Did anyone else see them rebuild the "Rustang?" Very cool episode! Kate
|
| Good Mustang shop in or near Baltimore? | 22 Aug 2004 14:00 GMT | 1 |
I desperately need a good shop to take my mostly stock 91'GT. My clutch is getting worn out and I would like a new one put in but I do not trust the Ford dealer to do it properly. I took my car there before and they somehow give me the impression to not really know how
|
| [Q] Wiper switch? | 22 Aug 2004 13:41 GMT | 1 |
Will this fit my 88' convertible? http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=7916850438&rd=1#eb ayphotohosting mine mine has a short arm that looks like this one. The seller doesn't know
|
| Who installs blowers near Pittsburgh pa? | 22 Aug 2004 06:26 GMT | 2 |
Anyone know who installs superchargers near pittsburgh pa?
|
| MONKstang | 22 Aug 2004 01:03 GMT | 4 |
If you are a fan of the MONK TV show, the season's last episode featured a doc giving our obsessive-compulsive, multiphobic detective some meds that completely changed his personality. One of the things he did, under the influence, was go out & buy himself a red GT convertible & ...
|
| Replace PCM module?? Help!! | 21 Aug 2004 21:27 GMT | 19 |
Well to catch anyone up on my problem, here goes. Got in my car a few weeks ago, totally dead. Go to jump it, hear a whirring sound as soon as the jumper cables are connected, its my air pump. Ok, air pump stayed on for some reason, drained the battery. Couldnt jump the car ...
|
| PCM problem update.. | 21 Aug 2004 21:22 GMT | 3 |
Ok, just talked to the Tech thats workin on my car. He said when they checked the whole electrical system, the proper voltage isnt coming out of the computer, and its very hot to the touch. He says its definitely bad, not just a "we cant find the problem so were gonna replace the ...
|
| 71 mach 1 with 460 big block!! What do you think? | 21 Aug 2004 21:16 GMT | 4 |
Have to run search on 460 big block and it will come up easier.
|
| Replacement solvent for tank? | 21 Aug 2004 21:05 GMT | 14 |
Hi Folks, I live in Califuckya and no longer can get a decent solvent fort my tank. Would deisel or kerosene be a good substitute and if so witch is better? Anyone know where I could buy that much kerosene, 5 gallons at a time?
|
| For Sale: 2003 Cobra Convertible | 21 Aug 2004 20:48 GMT | 5 |
Hi, I'm moving cross-country and am selling most everything I have including my baby. :\ It's currently listed on eBay at http://www.6URL.com/ZVU All mods are listed there. It has less than 7500 miles on it, $27,000.
|
| ping 2.3Sleeper | 21 Aug 2004 13:13 GMT | 2 |
Don - Here is the followup article on that local judge. http://tinyurl.com/6tth7 Scott
|
| '95 sway bar | 21 Aug 2004 10:14 GMT | 14 |
I have a friend that asked me about his sway bar on his '95 cobra. He said he was going around a tight onramp turns an started to "crab-walk". he felt the backend trying to step out. He pulled over and found the his rear sway bar had broke. He is asking if the stock sway bar is ...
|
| '88 GT, 5sp shifter suddenly broke... Seen this? | 21 Aug 2004 08:56 GMT | 1 |
I was pulling up to my house in my daily driver stock 88 5.0 GT when the shifter suddenly went limp. No noise, no warning, nothing. It was as if the H pattern just disappeared and I was left with shifter that could make giant circles as far as it could move until it hit
|