http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&category=40017&item=791
6023075
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&category=40017&item=791
6022619
in case someone is looking for any

Omigod!  Talk about an instant legend!
Read on, then check out the link at the bottom.
---
Ford Shelby GR-1 hints at the future

The 2005 Mustang hasn't even made its debut yet, but I have to ask,
what comes next?  Yeah, I know there'll be all sorts of special models
like Bullets, Mach 1s, Cobra's and probably Bosses and Shelbys, but I
talking about the body redo.  I mean after a retro/heritage design,

98 Mustang GT. A lot of people here already know about it... my problem that
is. Low RPM / high gear + full throttle = stumble. I screwed around with the
spark plugs today.. gapped them all at 0.055 inches & the car ran a lot
smoother. And it didn't go away after a few minutes of ...

OMG!
Last night I saw one the finest LX Mustangs I have ever laid eyes on.
We went to the range in the morning then over to some friends house for
beers and lies. One of the guys has an LX he is wanting to sell. Why? He

This is too funny!!
http://www.angelfire.com/tn3/kaitlyn/McNasty
Enjoy the laugh!
Kelly

Go over to alt.binaries.pictures.autos and check out the pics of the Noble
M14. I see some of the 2005 Mustang in that car...or the other way around,
depending on how you look at it.
Don Manning

OK I have this 1989. Body is in pretty good shape. Car been sitting in garage
for 2 years because the oil pump failed on the engine. It needs several things
including a new engine, door work,  new radiator and new brakes as a minimum. I
have had the car since is was almost new (23K) ...

'95 Mustang GT.  302cu inch, 5spd.  42,000 miles.  I have a few
questions which I have not been able to find a concise answer to.
1)  Which version of Ford's EEC do I have EEC-IV or EEC-5
2)  Do I have ODB-I or ODB-II

HEY GUYS, i just purchased an 88 gt and it has after market 17 inch cobra r's
on it.. I noticed that the power steerinh pump is whinning a bit.. could this
be because the 17's are putting more strain on the pump? i dont want to change
the pump until i know for sure.. what do you ...

last year i installed Performance Suspention Technology leafs on my 69
coupe. at the time i noticed that the rear did sit slightly lower. i
figured, the heck with it, since it wasnt sucha big change, but now
the left rear corner of the car is even lower, bout 1/2 inch lower

I have an 04 Stang convertible, uses a PATS key.  Is it possible to get a
"valet" key for this car?  In otherwords, I'd like to get a key made with a
regular metal blank (not the PATS blank).  The reason... often when the car
is running, I might need to pop the trunk... since I ...

My son and I just stated this project..this is mostly info for others.
I hope to upadate this thread as we go.
Picked up the new ford racing 5.0 (M-6007-XB3) yesterday and began
getting it ready to put into a 67 mustang with a C-4. The motor comes

The driver's door sags about 1/8 -1/4" to the rear.  This obviously causes the
alignment to be off while closed.  It appears rhat the roller on the bottom
hinge is flat-spotted and just wore out.  Question is: is this roller a
replaceable item by driving out the pin and putting in a ...

Does anyone have one, and do you like it? Is it louder than other comparably
priced cat backs?