OT but still cool.
http://tinyurl.com/56yp7
Scott

i have a 68 that im building up.im using  the edelbrock performer
package, carb,cam,intake,and 600 carb.and a good set of aluminum
heads.im not sure if i want or need long tube headers.anyone ever put
long tubes on a 68 stang?could short tubes be better for this mildly

Who makes the best leather conditioner/restorer?
Thanks

Anyone familiar with this brand of rotors?
Ebay reference is:
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=7921674351&ca
tegory=33564
Thanks

The Ford dealer had done just about everything I'd asked of them. When they
fixed the problem with the blowing fuses in the clutch/ignition lockout
switch, my instrument panel came back - along with a CHECK ENGINE light.
Now, TFrog is 11 years old with 171,000 miles, and, frankly, ...

My #$%$ kids looped the rear seat belt around the plastic loop
attached under the passenger seat headrest. The seat is all the way
back and there is no way to untangle the belt from the loop since the
mechanism keeps the belt tight unless there is no slack left. Now I

  Check this out:
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&category=34198&
item=2489763199&rd=1

Wanna know how much I got for it?
Well..
Norwegian Kroner converted in to US dollars: 13970$!
An original 1991 Mustang LX 5.0 convertible with AC, PW, PM, and so on.. No

I put in my USPS addy a month ago on Ford's website for an 05 Mustang
brochure. Today in the mail I find a 4x4" pack containing an 'instant new
car kit'. Looks to be a smelly thing for the mirro with the Ford logo on
it. The pack says "It's a whiff of things to come'. Comes with ...

I have been a bit busy lately.
Here is a link showing photos and a description of the project.
Have I gone off the deep end or what???
Bob

Hi, I want to sell one of my cars. I haven't done this in years as I usually
trade in. I hear all the horror stories now days about scamsters and fake
cashiers checks. I want to protect myself as much as possible. Requesting
cash is not always realistic. I could verify the cashiers ...

Anyone here have a drivers seat they would wanna part with or know where I
could get one rather cheap?  The drivers seat in mine is broken beyond
repair by the previous owner and I cant afford to sink 300 into a seat right
now.

I have a '00 Mustang GT with 63K miles.
I went to a local AutoZone today and got a PCM readout since my "Service
Engine Soon" light came on. Here was the output:
Code: P0455

Hey there group!
I have a 2000 GT with 42k on it. When I start it it keeps stalling. After
awhile it will stay idling, but at about 500 RPM.
Awhile back it would do the same thing, but kick in normally after about 5

Does anybody know where I can get a rallypack for our -65 Mustang (don't
want one for -66 model, only the -65)? Been looking everywhere, haven't been
able to find any shops who sells them.. Used one is no problem..
Tomas Kristiansen