I have a 1994 Mustang convertible. The metal part that connects the drivers seat to the power seat track is broken. I've taken a picture and circled the broken part. See http://members.cox.net/s.w.smith/MustangSeat.jpg  Do I need to buy a power seat track or is this a separate ...

Well... how's she comin?
The suspense is killing me!
Kate

Sorry if this has been posted before, but I thought this guy's eBay auctions were interesting:
http://cgi6.ebay.com/ws/eBayISAPI.dll?ViewSellersOtherItems&userid=bishop287911

I just did a contract job at Ford Motor Credit. Upgrading memory on tehir
boxes in preparation for their retireing OS/2 Warp and was told the
company I contract for does a lot of biz with Ford so I should be able to
get in on X-Plan (I believe that's the one for 3rd party & Ford ...

We have a long time customer at our shop who wants to to swap his inline 6
with a V8. While not an extremely difficult task, there isn't much time for
major fabrications and so on, as our regular work must still take place
throughout the day.

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&category=34198&item=792
0006968&rd=1
check out the price on this holley carb!

I was wondering if someone could answer a couple questions
1) what is the stock rim size on a 86 fox bodied wagon?
2) what is the widest tire I could fit on the stock rims?  I can get 4 brand
new 215/65/14's for $100, but I don't know if the 215's would fit on stock

-- The Mustang Storm Quiz --
1. Which would be more effective at stopping Hurricane Ivan?
a) Torque
b) Horsepower  

http://www.bills2.us/1982gt.html
From none other than our old Bill S.
///Mike
1993 BMW 525i

Hello all. As the subject implies, I own a 1986 GT and I am considering
headers. Basically, my cats are shot, and I figure if I have to replace the
H pipe anyway I might as well go the full 9 and replace the stock manifold
too. However, I am unsure as to what my best option would be ...

Are slotted / Cross-drilled rotors really a help over standard rotors?
Anyone have any experiance with a brand called "Steel Run"? Comments on
them? I am considering buying a set of 4 cross drilled / slotted rotors
for an OT vehicle, and these would save me about 30 bux over buying

Just curious if some of you could help me do a little math.
If I took a stock 302 crank, rods at 5.310" long, and pistons for a 331
stroker engine, what would I end up with in cubic inches at .030 over bore?
Also, would my compression ratio be different with stock 64cc(I think?)

It appears that both of my doors are a little loose as you can hear them moving
when going over some bumps or even when closed there is some movement when
pushing them in.
Unfort this happened when I was having problems with my Lojack system and they

Need some advice:  I  recently purchased an used  Mach 460 CD (Single)
Player including it's rear connector, and  would like to connect it to
my 95' Mustang OEM Radio-Cassette Player.
I was made to believe it would be relatively easy, just connecting one

When I go to the site, I get a security message asking if I want to allow
the site to paste information from my clipboard??? It happens every time I
go to their home page, and there is no way to get out of it, short of using
Task Manager to end IE.