Headlight Doctors, Inc.
His name is Joseph Avalos, and his email is
headlitedoctor20@no_spammy_sbcglobal.net.
(remove "no_spammy_" from above)

Recently, a ladyfriend who owns a Ford V-8 product went in for a through Smog
Nazi Check II and failed miserably.  The reasons may shock you.
HC was way up there, at least 100 ppm beyond nominal.  CO and NoX numbers
supported a fuel system problem as well.  Everything else (visual ...

Just installed the new light set from Mustangs Unlimited (stock version,
naturally).
Before and after shots, showing the original glaucoma and then after the
corneal transplant.

Do you know a French forum about Ford Mustang please
Regards

I'm doing a rear disk brake conversion on my '87 GT using t-bird stuff. Do
they make ceramic pads for this year mustang?

Inspired by a previous post today.    Here's a question that might help
others as well as myself.   I've read many times about cleaning the ACT, EGR
and MAF sensors, but I *think* each one needs to be cleaned differently and
with different cleaning solutions.    How about someone ...

I have been searching through many catalogs for a Pitman arm for a 67 Mustang with manual steering and a 1" sector shaft. I can find other years and some for power steering but none for a 67 with manual steering and a 1" sec shaft.
Yes this is what I have, no the car never had ...

On the way home last night I stopped by the local Ford dealer and saw
an '05 500 out front -- $28,000 sticker, looked real pimpin', but it's
a HUGE car compared to an Accord or Camry -- and some F pickups, but
no Mustang.  (Subarus too, since this is a Subaru store too.)  When is

I am trying to fix a problem that doesn't seem to exist. I originally got
the code for insufficient EGR (rough at idle) and began replacing cheap
parts that were east fixes. I went through the TPS, EGR valve, Vacuum
Regulator, and DPFE Sensor. Ran better, but the light stayed on, ...

I have a 66 mustang convertible with an ember glow and parchment pony
interior. I have looked fairly far a field and can't seem to find an exact
match to replace the worn out one. Does any one know of a place that makes
interiors for Mustangs that are correct e.g. color match?

All,
I'm going to replace my log-style 289/302 manifolds with either (in no
particular order):
- Hi-Po manifolds (expensive)

With an automatic transmission!
Per Motor Trend:
0-60 in 5.1 - Note: with a 5-speed automatic / final drive 3.31 gears
1/4 mile - 13.6 @ just 99 mph - Note: They suspect "the car's deep,

Hey all!!
Just thought I'd poke my head back in =) Been a couple years!
Some of you might remember me, used to own a 2000 V6 mustang back in
the day! Don't have her anymore now though *sniff*...

for motermount 302 gt any year drive shaif also
--
----------------------------------------------------------------------------
----------------------------------------------------------------------------