Or is it better to drive with a snail?

I cdnuolt blveiee taht I cluod aulaclty uesdnatnrd waht I was rdanieg The
phaonmneal! pweor of the hmuan mnid Aoccdrnig to a rscheearch at Cmabrigde
Uinervtisy, it deosn't mttaer inwaht oredr the ltteers in a wrod are, the
olny iprmoatnt tihng is t aht the frist and lsat ltteer be ...

http://www.dontdrivejunk.com/details.html?vid=30117
///Mike
TS #63
1993 BMW 525i

To go with your cabinet lock gas cap on the beater
http://hacked.free-bsd.org/funstuff/pics/cardoorlock.html
Kate

hey guys...I was wondering if anyone could understand this problem...I am
working on making the 5.0 run better in my 88 LX. I was noticing one day
though, the distributor is pointing almost at a 90 degree angle to the
fender. Most I have seen point towards the rad and a little more ...

Been a while since I posted.  Hello again everyone.
I've made a few changes.    My Gatorbacks wore out and I put some Kumho
Ecsta MX tires all around.   At one time I thought I'd remove a major
appendage before putting Korean tires on my 'steed.    However,  after

Anybody else spot this one?
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&category=6236&item=2492
074096&rd=1
October 15th, the man says.

2000 GT 'vert with stock Mach1 system sounds like crap (unless I crank
it all the way up).
I can't tell if the speakers are crappy or the receiver/amp.
What is a decent brand/model that is commonly used these days in a

aftermarket seats.... anyone using... positive or negative inputs
sought regarding brands (ie Recarro, Flofit, Scat, etc) going into my
65. Need lumbar adjust. Recently began looking at ebay late model
Mustang (GT) seats. Any preferences there also appreciated. Looks like

From a November 2004 Car Craft "Musclecar of the Month" feature on the
455 ci '68 Hurst/Olds, the following excerpt was quoted from an August
1968 Car Craft story on that same model:
"[T]he H/O [that Hurst employee Jack Watson] brought down was 'as

Hi, I am curious does dealerships keep a record of all repairs done to
a car at that dealership and IF SO, can a person who had the repairs
done get a copy of the receipt? Just curious....
Thanks

for my 96 GT. I still have the OEM with 54K. What's best/quietest for normal
street driving? And what's a fair price for servicing all four corners
(rotor turning, etc.)? Thanks all.

I found this on another forum and figured yall might like it......
Bentley Forums
- - - I used the ash tray today. How do I replace it?
Camaro/Firebird Forums

1985 Mustang LX, 3.8 L CFI
This car has only 83,000 miles on it, and runs pretty damn well.
Big problem though: every 2-3 months or so something goes wrong and I end up
with a dead battery.

I bought a 70 amp welder from walmart for like $90 (got lincoln electric
welding gloves for $10)... toyed with it.. took me a while to figure out how
to get the thing to freakin weld.. but it's definitely neat. Kept the fire
extinguisher at hand while welding. Pretty neat. I'll toy ...