Just wanted to thank JD for his tips regarding the lengthening of the
adjustment slots such that the proper camber angles can be dialed in after
the installation of the FRPP M5400A suspension system.  Camber was set
at -0.30 right and left and toe-in at 0.00.

I've got a clicking noise that I first thought was the fan hitting
against the shroud, but after inspection it was not the fan, and
seemed to be coming from the belt.
I haven't been able to see anything that could be causing it.

Ohio sister trying to find instructions for installing Hurst shifter into
1967 Mustang, toploader transmission....not the "tool man", could someone
advise please?  Thank you

How long should the fuel system hold pressure?
When I park the car, it's got 39psi. After about 10mins it's down to 20psi.
I don't know how long till 0psi.
Is this normal or am I to suspect a leaking injector?

Looks like there are some Mustang themed shows coming up on the
Discovery channel ...
Tonight (9-28) 8pm ET, a show titled "Mustang"
http://tinyurl.com/5zj9p

Guys...  I can't find an answer for this on my Bronco groups, so here I
am...
I've taken out the 1980 Bronco (351 with C6 3-speed auto) for the coming
winter - the 5.0 is sad, but she'll be okay.  :)

I appreciate the feedback I have gotten from a couple of folks
here..you will have saved me money on a couple of projects..
And I learned a few things I didn't know..
Thanks..

I had a SCT 4 bank chip installed in 98 GT a few months ago along with a 3:90 gear.  Now, when I am driving at 60-70mph and punch it I get horrible detonation.  Has anyone had this problem and can offer some advice?  It has been doing this ever since the chip was installed.
Now my ...

Does anyone have any experience with repairing tears in convertible tops ?
I have about a 3" tear in the rear, and I'd like to stop it before the whole
top shreds up.
I'm thinking either an iron on patch from the inside, or maybe a piece of

Hi...
If any of you watch Tuner Transformation on Speed Channel, then you will be familar with my Mustang. I'm potentialy looking to sell it. If you're in the market for a beautiful, one-of-a-kind original Mustang, pls contact me at orosworld@NOSPAMhotpop.com (mind the spam trap). ...