| Thread | Last Post | Replies |
|
| OT: Joke | 30 Nov 2004 20:46 GMT | 3 |
http://www.nomorepasting.com/paste.php?pasteID=25894&noLineNums=1 -- A happy kid behind the wheel of a 98 Mustang GT Cold air intake
|
| 95 Base model upgrades | 30 Nov 2004 17:11 GMT | 7 |
i recently came into ownership a 95 AT base model with the 3.8L . what are some of the best and most benifical engine upgrades? do they make superchargers for the 3.8?? that is more for curiousity sake. would like some extra horsies to play with as the car has 165k and has lost some ...
|
| Whats the Cost of '05 Saleen S281SC fully Loaded? | 30 Nov 2004 13:54 GMT | 26 |
~~~~~~~~~~~~~~~~~~~~~ '03 FLHRCI USSF SINCE '92 "DE OPPRESSO LIBRE"
|
| Automatic Transmission Fluid for 83 Mustang | 30 Nov 2004 13:17 GMT | 11 |
I own an 83 Mustang convertible with the 3.8 liter engine. I need automatic transmission fluid. My manual says to use Motorcraft type H. My local Ford dealer has never heard of Type H. What should I use that is currently available?
|
| limited slip rear | 30 Nov 2004 07:32 GMT | 15 |
I have a 67 mustang not sure about the rear but it has the 289 auto trans, what would i need to do/replace to make this rear a limited slip unit> i work or chrysler dodge products, they are just a matter of removeing the carrier and installing a limited slip one
|
| Anyone want a motor?? | 30 Nov 2004 02:18 GMT | 3 |
I have a 4.6 sitting in the back of my truck. I'll let it go for real cheap. It has heads and everything on it(non-PI) but it has 2 stuck valves. Bottom end is in good shape. Let me know. I need to get rid of it really fast before I get tempted.
|
| GT VS. COBRA | 30 Nov 2004 00:50 GMT | 10 |
I'm looking to get another convertible mustang. My biggest problem is could I be happy with a Gt after owning a Cobra. I test drove a "03 Gt and was suprised when I stepped on the gas but not in a good way, it was rather dissappointing. I think I'm stuck in a Cobra lol. Now the GT ...
|
| info on car wax | 30 Nov 2004 00:33 GMT | 10 |
FYI, I came across what I think is the best car wax I've ever seen. I've used darn near everything out there between my 55 Packard and 68 Cougar over the years, but this German stuff I never heard of before, by Klasse, is definitely the best I've personally seen. I tried some of
|
| Finally got my '05 :) | 29 Nov 2004 19:39 GMT | 27 |
Took delivery last Monday night (11-22). Very happy with the car so far, but must spend a little more time with it to give a fair evaluation. Here's some pics: http://pg.photos.yahoo.com/ph/mx6turbo89/album?.dir=764a&.src=ph&store=&prod
|
| A toast to a worthy opponent and inspiration! | 29 Nov 2004 15:10 GMT | 1 |
The 50th anniversary of the Chevy Small Block!! HorsePower for the masses! I owned a couple before I went contrarian... meaning Ford
|
| Giving Thanks | 29 Nov 2004 13:54 GMT | 32 |
Happy Thanksgiving Everyone. I suppose I could get all philosophical here, but there is really no need. Kate
|
| Factory Options for Mustangs 64 / 65 / 65 | 29 Nov 2004 13:24 GMT | 2 |
I searched the web for info on what factory options were available for the 64-66 mustangs, without luck. Anyone know where I can find it? Thanks. Michel.
|
| Ran at the track last night!! | 29 Nov 2004 03:36 GMT | 13 |
I must say I wasn't expecting what I got. I went to the line hoping for any kind of 13 but expecting a low 14. Well, I launch hard and it hooks, shifted into second and barely spun. I was impressed until I felt the traction control kick in. Damn, I forgot it on. Well, I
|
| The view from the other side. | 28 Nov 2004 16:37 GMT | 6 |
GMInsideNews forums on the 05 Mustang http://forums.gminsidenews.com/showthread.php?t=7563&page=1&pp=20
|
| Mach 1 | 28 Nov 2004 16:35 GMT | 6 |
What years were the Mach 1 Mustangs made? I could have swore I saw a 1999 or 2000 Mach 1 on the lot when I purchased my 02 GT a couple years back. Someone told me they did not make them that year though and they were sure of it. Perhaps it was a Cobra that I looked at. ...
|