I just got my car back from the shop. {I was rear ended) Now it makes
a really high pitched whine when idling and under light load. When I
put a little more load on it, it sounds like it goes away but im not
sure, my exhaust is to loud to hear much.

Given the huge demand/low supply of the new
2005 Mustangs, one can only surmise that GM
will seriously consider resurrecting the defunct
Camaro based on the '69 model as that's the

Note: Again, this is crossposted.  Just trying to spur some
conversation in the Cambird group and I thought this was relevent to
Mustang group because we all love to see car guys running the auto
industry.

Just got my '66 fb and am now plotting and planning. I don't intend to
do a full frame off. One reason is very limited space availabilty. I ask
thee that have tread this path before.
Is it better to do the body / interior first working to improve the

The December issue of Road & Track has a great review on the '05 Mustang GT.
http://www.roadandtrack.com/article.asp?section_id=3&article_id=1662
In it, the reviewer says,
"Response for the first few hundred rpm off idle is soft, the result of only

Ford Mustangs are EVIL, they are the work of the devil, made to
collect your souls and to turn you into brainless slaves of hell.
If you like Ford Mustangs, you will lose your soul to be damned
for eternal torment in hell.Demons and devils will feast on your soul

I have found a 69 mustang fastback, it is in pieces since the guy took it
apart and realized it was in need of alot of work he didn't have time for,
it has the original 289 in it, all the parts are there, but the windows were
left down and there is water damage, he wants $1200 for ...

I have a 89 2.3L mustang. whats is needed to swap ina 5.0L? besides the
motor, computer rearend brakes. exhaust. fuel lines?? do the spindles
need to be change?

I am going to check out a 68 mustang 302 2V P/S,P/B,A/C.  The owner
said he has replaced the engine, rebuilt the C4, and replaced many
parts in the engine bay and has reupholstered the interior.  He thinks
the body is rust free and straight.

Guys,
Just wondering if my 68 mustang convertible capsizes would these pillars
give way or are they reinforced like your newer BMW's and Mecedes Benz.
Just precautious!

I found this great little site. I signed up two weeks ago and got 2 Disney tickets and this week they are sending me 2 Universal Studios tickets. Here's the link http://66.219.102.40/ and by the way I am a real person, this is my real email address. I'm not a spammer and didn't ...

I want to see if anyone sees anything wrong with the following
proposed configuration, including if I'll have starter/ring gear
interference problems, before I start on the project. If someone sees
something wrong, please make a suggestion. This setup, minus the right

I'm looking to replace the fuel filter on my 96 GTS. Any links out there?
Any got ya's I should be looking for.

here yesterday, now gone!
http://www.windsor-fox.com/
?????????????????????????????????????????????
jd

Notice how similar the Ford 427 is to the Chrysler
300?  They could have had that market, albeit only
if they offered a lesser engine as well as the big one.
They could still make a dent, but their answer to