For those of you that store your car over the winter, do you drain the
oil and put fresh in and then change it again come spring?  I was told
once that oil turns acidic through time and that it wasn't a good idea
to let it sit for more than three months.  Is this true?

I own a 1985 Mustang GT which is pretty much stock except for having no
mufflers cause we chopped em off, 8.8 rear-end with 3.73 gears, and an
Edelbrock Intake Manifold.
Now what I want to do exhaust front to back!!.  I mean right from the

My car was broken into last night and they broke out the drivers side
quater window.  Does anyone know where I can get a new quater window
glass?  All the parts places I have looked at dont carry glass except
for windshields.

I ordered my GT three weeks ago, and was wondering where will it be built? I
called Ford today and it still shows as of Dec 2, clean/unschedualed........
Spider

I cleaned out all of the igntion wires that go to the ignition modules.. and
I cleaned the ignition module connecting parts where the wires plug into. I
changed the spark plugs (NGK Iridium). The studder is still there. Studder
on acceleration that is. Please advise. Thanks.

Again, per Hemmings:
- Speculation had a 400 hp, IRS-equipped Cobra debuting in '06 .
- Fact had it arriving in calander year '06 as an '07 model.
- But now the '07 model date is "in danger".

im looking for a exhaust manifold for a 65 mustang witha 200 6 cyl. any help
would be appreciated.  hosemonkey1008@aol.com

A brake question, thankfully not about the Mustang, but the family minivan.
First, the background: Had a brake job done on it by our mechanic about
two weeks ago, so the pads and rotors are still fairly new with only a
couple hundred miles on them. Coming down a 12% grade near my ...

Has anyone come across the problem of their Brake Light coming on for no
apparent reason? This is a 92 5.0. Parking brake is off, master cylinder seems
full. The car stops fine. Possibe sensor issue?
Any Ideas?

Another example of why overpriced European cars rank
last in quality behind Japan and the U.S.
http://www.ctv.ca/servlet/ArticleNews/story/CTVNews/1102356951680_97766151/?hub=
TopStories

I just compared my 1968 mustang conv. lower control arm ball joint with my
spare parts car which is a 1967 coupe and they measure and look identicle (3
rivet bolt pattern). Both are are rivited onto the lower control arm assmbly
which would have to be grinded out in order to bolt ...

Two interesting stories:
Boys bouncing golf ball in parking lot... ball hits woman's SUV, she runs
them over!
FoxNews reports on Wells College going Co-Ed... women there protesting and

First of all thanks a bunch to all of you that helped me before, the
car runs smoother now that it has new spark plugs, cables, fuel
pressure regulator, among other things but the rough iddle still there
after a few minutes of the engine being runing. Does anyone have any

I have been out of the stang scene for a few years, my first car was and
still is a 67' T-5 and I just ordered my 05' acouple of weeks ago, my
question is that I went to Crackle Barrel last week and run up on an awsome
04' anniversary Mach 1..... then today I ran up on a poster ...

where have I been.....when did this start?
the '05 'stangs I've been drooling on have "County of Origin"
stickers......County of Origin is Italy for the automatic trans  - both
6s and GTs.