| Thread | Last Post | Replies |
|
| Performance Chip Question | 10 Jan 2005 02:09 GMT | 4 |
I'm thinking about installing a performance chip into my '04 V6 for a few extra horses. These chips however, are kind of pricey, some costing $400-500. Many people have similar chips listed on Ebay from at low as a few dollars. Are these cheaper chips safe to install? I know ...
|
| Front license plate mounting on '05 GT | 10 Jan 2005 02:02 GMT | 9 |
My '05 GT has two 'dimples' in the front, plastic bumper for the purpose of mounting a license plate. I assume that means drilling the plastic bumper and bolting a plate on. I can envision sheer ugliness. Any ideas or better mounting tips. Anyone know of frames which would
|
| For '05 Mustang GT The Accolades Just Keep Coming | 10 Jan 2005 01:07 GMT | 1 |
Snipped from a website. --- What is it? That would be the MINI.
|
| OT: Need appliance repair help!!!!!!!!!!!!!!!!!!! | 09 Jan 2005 16:55 GMT | 3 |
This should explain it all. http://www.mwcmustangs.com/washer.html Thank you so much for any help! Don Manning
|
| Hood Scoop for 40th Anniversary hoods? | 09 Jan 2005 15:48 GMT | 1 |
Does Ford (or any other company for that matter) make a hood scoop that fits the 40th Anniversary V6 hoods (some of the hoods anyway)? Go to the following link to see what I'm talking about: http://memimage.cardomain.net/member_images/4/web/760000-760999/760386_25_full.jpg I ...
|
| hood scoop theory 101 ?? | 09 Jan 2005 15:44 GMT | 11 |
My baby is finally done at the body shop.The shelby side scoops and mach1 hoodscoop look awsome! I was perswaded not to cut a hole in the hood for a hoodscoop for 2 reasons. compromising the structural integrity might cause flexing that could warp the hood and damage the
|
| Supercharging My Bullitt | 09 Jan 2005 09:23 GMT | 4 |
I'm thinking of going with the Pro-Charger...Anyone use this on the 4.6???
|
| Stripe Dimensions for 1970 Mach 1 | 08 Jan 2005 19:38 GMT | 5 |
Does anyone have the correct dimensions for both the hood stripes (non-shaker) and the trunk stripes? I would greatly appreciate any input! Mark
|
| Error codes finally. | 08 Jan 2005 19:15 GMT | 19 |
Check engine light JUST came on... so I immediately pulled out the code reader & got: 0307: Cylinder 7 Misfire Detected 0174: System too lean (Bank 2)
|
| 2005 GT Christmas present | 08 Jan 2005 13:27 GMT | 14 |
Now that I'm 60, my wife thought I needed a boost and bought me a new screaming yellow, 5 speed manual, GT for Christmas. Well, actually I'm doing the paying, but she said OK, and that's about the same as buying it!
|
| spoiler or no spoiler?? | 08 Jan 2005 03:33 GMT | 26 |
I am looking into ordering my new 05 vert Friday, and I cannot decide....spoiler or no spoiler?? Help me!!
|
| Something sticking...... | 08 Jan 2005 03:29 GMT | 8 |
I have a 00 GT with about 75,000 miles. At about 68,000 miles it developed a ticking on the right side (from the driver's perspective. When I first start it cold it doesn't tick. After about 1-2 minutes it starts ticking quietly. It does not tick when idling, only at cruising ...
|
| PING: Tim (Musttanguy) | 08 Jan 2005 03:19 GMT | 3 |
Check email please =). I need to change my order. -Mike -- A happy kid behind the wheel of a 98 Mustang GT
|
| 1995 Mustang | 08 Jan 2005 01:39 GMT | 4 |
Look for a digital clock that's mounted on the dash of my 1995 mustang. Can anyone help.
|
| OT: Toilet Brush Warning: Do Not Use For... | 07 Jan 2005 15:10 GMT | 4 |
And they wonder why everything costs so much! Toilet Brush Warning: Do Not Use For... ...personal hygiene. Yes, this is a real warning on a real toilet brush label, and the (duh!) admonition has won the top spot in the 8th
|