| Thread | Last Post | Replies |
|
| blue xmas | 04 Jan 2005 03:40 GMT | 6 |
Here's alittle something for you football fans.http://www.extremeskins.com/modules.php?op=modload&name=banghaha&file=i ndex excobra boy
|
| Point Setting For 1967 Ford Mustang | 04 Jan 2005 03:30 GMT | 12 |
Can someone tell me what the proper setting is for a 1987 Ford Mustang with a 289 engine? Thanks John
|
| Part Number Request: 1996 Mustang GT: Keyless Entry Remote | 04 Jan 2005 03:16 GMT | 5 |
Can someone with a 96 GT check the part number on the back of their Keyless Entry Remote for me? My father has lost the remotes to his GT and I'm trying to get him the correct ones for his car but I can't seem to find an exact part number. I found the Service Bulletin on how to ...
|
| *CASH*CASH*CASH* | 03 Jan 2005 23:40 GMT | 1 |
Neo Tech Party Administration *CASH*CASH*CASH* Posted By: B (205.188.197.157) Date: 01/02/05
|
| Engine test stand? | 03 Jan 2005 20:08 GMT | 5 |
Hi Folks, I was considering building my own engine test stand to break in cams, tune, valve adjustment, etc. before installing the engines in cars. It would be complete with a radiator, exhaust, an instrument panel and battery/starter. I go through a few engines a year and it ...
|
| OT: United States Flag etiquette. | 03 Jan 2005 10:11 GMT | 8 |
I have searched and searched, but can not come up with an answer. 3 flag poles. Besides the US Flag and the Oklahoma flag, what other could/should be flown. An answer has to be found since there is 3 poles. Don Manning
|
| Can an XM radio FM Modulator be put in the Shaker systems??? | 03 Jan 2005 07:16 GMT | 1 |
OK, I am clueless to stuff like this....but if there is no AUX input on the Shaker system, can this be achieved?
|
| 390 cam install | 03 Jan 2005 05:49 GMT | 13 |
I went to install the new cam in the block I got back from the shop and it wont go in. They put in new cam bearings. I tried the old cam for giggles and it didn't fit properly either. Is this a common prob. with 390s? You'd think they could install them square if that's the case. ...
|
| Installed heater and windshield wipers and now no guages... | 03 Jan 2005 02:34 GMT | 7 |
What now? The guy at the shop said he couldn't find my 1983 windshield wiper switch, so he put a different on one there which for some reason requires an additional switch on the dash. Now I have no fuel, oil
|
| End of the year gas prices | 03 Jan 2005 02:28 GMT | 36 |
Just wondering what everyone is paying for fuel as the year comes to an end. Today in Buzzards Bay Ma. I paid $1.77 for 87 octane. HAPPY NEW YEAR!
|
| Control Arm Front Suspension | 03 Jan 2005 00:01 GMT | 4 |
My 93 LX is has worn out front balljoints. The Haynes and Chilton Manuals say the entire control arms must be replaced. My local Ford dealer told me Ford has discontinued the control arms. None of my local parts houses carry the control arm, however Livermore Perf. online
|
| O2 GT quarter glass | 02 Jan 2005 17:24 GMT | 3 |
I have a 2002 GT convertible and the driver's side back quarter glass will not go down. All other windows and top work fine. If any suggestions- please tell me what to do or what to look for. RSH
|
| How to test speaker polarity? | 02 Jan 2005 16:15 GMT | 8 |
I had a long suspicion that my Mach 460 stereo (2K GT) might not be properly wired to the speakers. It seems like a major pain to remove the covers and look at the wiring. Is there a test CD that can be used to verify polarity?
|
| ford cylinder layout 5.4L triton | 01 Jan 2005 23:15 GMT | 7 |
Hey guys, What's the cylinder arrangement? #1 on the forward passenger side and odd numbers in increasing order on that side or what?
|
| 2004 mustang power steering | 01 Jan 2005 21:21 GMT | 9 |
I am just wondering if anyone else has had a problem with a whining noise that sounds like it is coming from the power steering? Took it to ford and they said all 2004 mustangs whine...do they?
|