| Thread | Last Post | Replies |
|
| elenor on eBay ??Anyone seen one lately | 12 Jan 2005 20:39 GMT | 5 |
I'am looking for the car/item# ?? One sold recently 67 fastback elenor clone ?
|
| Swap question | 12 Jan 2005 13:26 GMT | 5 |
I'm in the process of getting a '92 coupe to replace my '82 Capri. When I swap the drivetrain from the Capri - '93 5.0/AOD - Can I just unbolt the K-member (93 also), struts, sway-bar, exhaust, trans crossmember, brake lines, and everything else and lift the body over the engine? ...
|
| parts car for 65 mustang fastback | 12 Jan 2005 05:28 GMT | 8 |
i am looking for a replacement part for my 65 fastback, specifically the portion between the rear window and the trunk all the way to the floor. It would include the brackets that sit down on the inner wheelhouses and all the structural braces etc. An entire rear clip
|
| Ford Mustang hype will be over in 2.5 years. | 11 Jan 2005 23:21 GMT | 4 |
Engine No 5.0 Liter DOHC 4.6-liter SOHC 24-valve V-8, 300 hp 315 lb-ft Transmission No 6 speed or 7 speed Only 5-sp man, 5-sp auto Air Conditioning (manual) No Auto Tilt steering wheel No Telescopic
|
| OT: Well, kinda. | 11 Jan 2005 20:08 GMT | 9 |
It is still Ford. It is a Roush... http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=4513776016 Don Manning
|
| 65 body on 2003 chassis | 11 Jan 2005 20:03 GMT | 5 |
I recently read in one of the hot rod magazines that somebody is using 2003 Mustang chassis to build a 1965 Mustang... I haven't been able to find the magazine since... does anybody know this guy's name, or the name of his business, and th website?
|
| Radiator leak | 11 Jan 2005 18:05 GMT | 7 |
I discovered that I have a small radiator leak. its on the passenger side bottom portion. on a seam. The leak looses very little, enough to leave a 6inch damp spot under the car on days or nights when the temp goes under 30degrees.(temp above 30, no leak) Is there some type of ...
|
| Ping -> Jim Warman | 11 Jan 2005 16:54 GMT | 7 |
Jim, if I might call upon your experience, what's your opinion of Seafoam? TIA. Joe Calypso Green '93 5.0 LX AOD hatch with a few goodies
|
| O2 Sensor-Bosch vs. Borg/Warner | 11 Jan 2005 15:11 GMT | 1 |
Is one better than the other for stock 1990 5.0 mustang. On ebay the borg/warner is cheaper. Reliability? thanks, Ernie
|
| Bad news for 05 owners | 11 Jan 2005 13:03 GMT | 22 |
Glad I have an 04 :) http://blueovalnews.com/2005/advisory/engines.2005stopship03jan05.htm
|
| Mach 460 audio wiring | 11 Jan 2005 08:05 GMT | 36 |
Installing a new head unit for my 98 GT... need to know what wires are what for the head unit. Bought a diff. head unit (cheapie)... looking to wire it myself. So far, I've got the power working.... and 1 speaker hooked up ;D. Any help/advice appreciated very much. Thx.
|
| 69 rewiring options | 11 Jan 2005 05:05 GMT | 2 |
The last big step to getting my 69coupe done is the wiring. She sucks a battery dry in a matter of days and the wiring is original so should replace it anyway. There dont seem to be any reproduction harnesses available for 69 in the usuall places. the paddock, and mustangsplus.
|
| What water pump? | 11 Jan 2005 03:10 GMT | 5 |
'89 Mustang GT. Basically stock 5.0. Heads, intake and more planned for the future. Any recommendations on what water pump to use? My stock pump is leaking and I'd like to be sure that I make a good choice of a replacement.
|
| How long will unused tires last? | 10 Jan 2005 21:33 GMT | 3 |
I've got a set of 4 wheels and tires I pulled off an old Mustang I bought about a year and 1/2 ago. They have been sitting, stacked up in my garage ever since, inflated on the wheels I got them on, out of the sun. A friend of mine happens to need that size tire for her car.
|
| Will A Mustang GT ordered now be made | 10 Jan 2005 04:10 GMT | 3 |
I'm tring to get a good answer. I have just ordered a mustang 2005 GT with the IUG, 5spd, ICA, Wheel locks, aat, 17"bright. Dealer says they make it, but some items are on hold. Will this car be built or am I SOL, and shold scramble to find anything close to this. I
|