Summit sells aluminum roller rockers for small block chevy. Can I use the
1.6 rockers on my small block ford?

I started noticing a ticking in my engine (50K miles).  The dealer
tells me they think it is a cracked piston ring.  Estimated repairs are
between $5K and $7K.  I'm not really willing to put that much money
into this car.  They say they need to pull the engine and rebuild it or

I had to pull the interior trim around my gear shift, and what do I find
inside there?  A bag of wacky tobacky!
I don't want to get pulled over some day and have some drug sniffing dog
find something that isn't even mine.  "But Officer, I didn't even know

Imagine the quad-cam, supercharged, 5.4-liter, 550-horsepower engine
from the Ford GT supercar fitted between the frame rails of the new
Mustang.  With this kind of heat under the hood, estimated performance
would likely be 0-60 in less than 4 seconds, and the 1/4 mile could be

My 2000 mustang convertible is now sticking. It worked fine on Saturday.
The driver side does not want to come up.  I can hear the motor trying to
click, but not working.  How much does it normally cost to fix the
convertible top motor?

what should the idle be when starting, when warmed up, and when in drive

Thinking about upgrading the shifter on my '03 GT vert. How involved is
the procedure?  I'm fairly handy, but would not consider yself to be an
auto mechanic.
Also Any recomendations on a shifter?  I've heard som after market

My 95 v6 5spd has some clutch trouble.
The clutch is releasing and engaging in different pedal positions each
time I shift gear....
Sometimes the clutch releases halfway, the next time I have to push the

i just bought a 94 mustang automatic  and it is making a lurching when
warmed up and after about 8 miles it starts. the idle goes up when this is
happening does anyone have any suggestions please  tell me  thanks
                sammy3smith

The mechanic said they're supposed to be there (something to do with
the seats ), but that there are also rubber plugs available for them.
Should I plug them? This car has almost 0% rust on these pans, and I'd
like to keep them that way as long as possible. :) Thanks for any info!

Is the dash for a 66 similar enough to be used on a 65 or are there
such maor differences the will not work?
I have a 66 dash and want to pur in a 65 but someone told me too many
difference and it won't work.

THE GOOD:
It did 106 mph on its very first pass down the 1/4 mile, even with 2.56
gears.
THE BAD:

i have changed all sensors and light bulbs and still no progress. all light
bulbs work. no trun signals work in the car or out of the car and the 4
ways do work

Please help. I no longer have the engine compartment sticker with routing
for the serpentine belt in my 2000 Mustang.  It is a 3.8L with A/C. If
anyone can send me a diagram or point to a location on the web, I would be
grateful.  Thanks.  

Anyone know where to find extended wheel studs for an 87 gt?