| Thread | Last Post | Replies |
|
| Heater Core / Electrical Problems (2.3 Sleeper posting) | 13 Feb 2005 02:26 GMT | 16 |
Okay, so I paid to have the heater core done. Before I went in, my blinkers worked. Now they don't. The fuse was replaced, and we replaced the combo switch as well. Still no blinkers. The hazards do work. The steering column was dropped straight down, and the right side of
|
| Northern NJ Mustang mod experts | 12 Feb 2005 19:36 GMT | 1 |
Can someone recommend shops in northern NJ that do good Mustang mods? (Stuff like subframe connector work, etc...) Thanks Ron
|
| looking for rims 2000 Mustang | 12 Feb 2005 19:21 GMT | 1 |
I have purchased a 2000 model, but the tires that are on it are not for winter driving up here in Minnesota. I have called a couple of the local scrap yards and they do not have any rims. Looking for reasonable priced rims / tires. Prefer stock. Any help is appreciated.
|
| 1953-62 FORD ENGINE/CAR ID WALL CHART-312w2-4's,406w3-2's | 12 Feb 2005 15:57 GMT | 1 |
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&rd=1&item=6511433103&ssPageName=ST RK:MESE:IT vintage FORD wall chart for all vehicles made by FoMoCo from 1953 to 1962, included a THUNDERBIRD section and such rare engine options as: 312 Y-BLOCK WITH 2-4 BARRELS
|
| 3.8l T-5 conversion | 12 Feb 2005 00:50 GMT | 1 |
hey all...just wondering if a 5.0l T-5 conversion will work on an 86 3.8l mustang. jeffrey_beagle@yahoo.com
|
| 59 ford drivers door mirror wanted | 12 Feb 2005 00:44 GMT | 4 |
for 59 galaxie. Please use your email server and email me directly since I dont come to newsgroups regularly. thanks wwhitfield@triad.rr.com
|
| Tire Size and Width Chart | 11 Feb 2005 19:18 GMT | 2 |
http://victorylibrary.com/mopar/car-tire.htm
 Signature CobraJet Thunder Snake #1
|
| Idle issue 97 GT 5speed | 11 Feb 2005 16:58 GMT | 4 |
my idle is off on my car it will not stay running evenly it used to do this every now and again when it was extremely cold (NC extreme not up north extreme Below 30) but now it is doing it even after it is warmed up. it runs ok at road speeds but if i take my foot off the gas ...
|
| Rear gear change in '91 | 11 Feb 2005 14:24 GMT | 6 |
I am thinking of swapping the stock 3.08's for 3.55's in my '91 rear end. A friend told be that it's not a good idea because the gears are normally lapped at the factory and if I replace them, my diff is going to howl. Can anybody comment on this?
|
| paint flaking off | 11 Feb 2005 04:43 GMT | 5 |
Have a 1996 white cobra. Anyone where to get a ready made can of touch up for it. I believe the code is zr1 or similar. Anyone else have this problem? It started on the doors when I pulled my
|
| SubFrame Connectors | 11 Feb 2005 04:43 GMT | 5 |
I am thinking of putting subframe connectors on my 1985 Mustang GT...........is there any particular kind that is better out there? Steph
|
| Sweet 95 8 cylinder GT for sale | 11 Feb 2005 03:41 GMT | 3 |
Just in time for spring! http://tinyurl.com/4myrn
|
| Need Help, Advice, Information - Possible purchase of '65 Mustang | 11 Feb 2005 03:39 GMT | 5 |
Good morning all, First off, before I even get a single response I want to thank anyone who gives me some of the advice I need. Anyways, a guy I work with is selling a 65 Mustang Coupe, and I'm
|
| 1 question and 1 observation... | 11 Feb 2005 03:27 GMT | 3 |
First, my question. Does anyone know if a rear seat delete kit is available to purchase for 87-93 hatchbacks? I seem to recall seeing some way back when my car was more current, but as with most items for these cars it's scarce at best now.
|
| Julian's SN65 progress | 11 Feb 2005 03:27 GMT | 6 |
http://www.horsepowered.com/forums/showthread.php?t=10506&page=9&pp=20 He's "turned a 65 into a stiffy!"
 Signature - Yes, I'm a crusty old geezer curmudgeon.. deal with it! -
|