I have leather seats in my 2002 GT.  Can anyone reccommend some good seat
covers to save some where and tear on the factory leather?
Matt

I'm still trying to recover from our annual MCA Regional Show today. Long
weekend, lots of fun, light rain most of the day, but also lots of sunshine
in the afternoon. The highlight of the day for me was a five-minute ride in
the Ford GT that our dealer brought out for our show. ...

Recap:...     I had an intermittent problem with an O2 sensor, plus
possible fuel contamination.  Ran out bad gas, ran "sea foam" through
vacuum hose, and put some into gas.   Made O2 sensor problem go away
and car ran normal..

http://images.art.com/images/products/large/10112000/10112137.jpg
http://www.caranddriver.com/assets/image/8302004124915.jpg
At least Ford was smart enough to NOT go with the intial Shelby
Cobra design from last year.

I have a stock GTA- super clean and up to now all stock. I would like to
start building up the horsepower a little, nothing crazy, but peppy.
(suspension is already done)
Right now its the 289 w/2bb....I would like to add headers, carb, cam and

I am in bad need for an engine bay wire harness for My mustang. It's an 1985
GT 5.0 5spd car. this car has air conditioning and is a california car. Any
information is greatly appreciated
Dave

I have a '96 Mustang Coup that is my daily driver
138,000 miles on original shocks and struts which I'm about to change.
I do not care to buy shocks based on race sponsorship, or that
the kids would be impressed by the brand I chose.

I have a 2001 Mustang GT and the cd player just quit. Any ideas what to do?

anyone know if there will be any new mach 1 mustangs built? i think the
05 body style could easy be changed to look like a mach 1 car. damn
those 03-04 mach 1`s are nice. there is a car lot in ky that has a minty
red 03 in there show room forsale. if i was not needing a house very

Read the news, folks.  The Shelby GT500 returns in 2006, with at least
450 horsepower.  Personally, though I'd like to see an even 500... make
that name GT500 mean something...
---

I want to put a billet grille in my 94 GT, but it looks like you need a
special tool to remove the original pony.  It's a six point internal star
like screw head with a small center.
Looks like the tool would have to be six points with a hole in the middle to

I have a Rockford Type RF 1 channel mono amp which puts out 1287 watts RMS.
I have two alpine 15 inch 2 voice coil, 2 om subs which are rated 1000 watts
RMS. i had this running last fall and it worked asome, then i took it out of
my car for the winter and now that i have put it ...

69 coupe. everyone always asks me why the front end sits so high.
i cant decide if it actually does or if the wheel openings in fender
are just higher. whether its supposed to or not, what are my options to
get rid of that goofy look. Ive heard that cutting the springs is not a

Well group.....
Years ago I re-did three 1966 stangs.  While the '66 model year has a
special place in my heart, I swore I would never have an old one again.
 The last one I did had metal fatigue and the now infamous cracks in

I have a 93 Ford Mustang GT...
Using on-line and in-print changeover manuals, I can determine which model
years have the same parts as my 93, but...
How can I determine which other models have the same parts???