Help?
I have a 99 Mustang Cobra (stock engine) which just had a Vortech installed.
The car runs great but 'check engine' light comes on and stays on. Once in a
while when I press the clutch while approaching a traffic light the engine

RockAuto sells an aftermarket lens for $65...
Does anyone know where or how I can get a cheaper one?
Thanks!
Steve

A headhunter from firm that sells advertising
head hunted me today. It was for advertsing in
a magazine called, "Modified Mustangs!!"
They do the magazine "Modified" as well, which

Before I install lowering springs w/CC plates, would it be worth while to
replace shock and struts as well?

Ugly, hulking, it looks like a Toyota sedan.
http://www.allpar.com/cars/lx/dodge-charger.html

  While a certain someone attempts to saw off the lowest rung on the
ladder, I thought I'd share with you my most innovative accomplishment
to date. That's right, while some folks like to trot out magazine
articles new and old so they can bench race ad nauseum in these

Well, I got my '01 GT back last week after they replaced the engine.
Finally, the car seems like it should(knocking on wood).  The
transmission shifts fine, the engine doesn't make any noise, and it
seems to even get better mileage.  Despite all of the problems I have

Thinking of purchasing Eibach springs (Sportsline) for 02 Gt. Any
feedback,pros or cons.Also are a new sit of caster camber plates absolutely
necessary,I already have the extended ball joint kit as well as the Rack and
pinion bushings (Ford parts from 05 catalog) Any advice

Ford to halt Thunderbird production
With sales falling, the roadster that returned with '02 model will
again go on hiatus after July.
March 11, 2005: 3:00 PM EST

I have a 2001 Mustang convertable.  Did not get an owners manual when I
bought it.
I looked but can't find the dip stick for the automatic transmission.
Anyone out there that knows where I can find it?

I thought the old 5-oh/302 guys would be interested in this info.
----
The GT40's have 1.85"/1.54" valves, GT40P's have 1.85"/1.46" valves,
and the stock E7TE's have 1.78"/1.46" valves.

Snow, snow, go away. The Mustang wants to come out and play!

John

I have a 1990 5.0 with a t-5 and I got a rebuilt tranny to replace it
with but it doesn't have a neutral safety switch on it. Do i need it
and does my car origionally have one?

But it looks DAMN good!!
http://www.mustangforums.com/upfiles/11266/E78B53D119954CE0BDD80F3D7AB9DB91.jpg

I am told by Dallas Mustang Parts, that there is no parchment headliner,
only saddle which is used in parchment interiors?  Is this correct?  Will my
parchment interior have to have a darker tan headliner?