the last few weeks my gt is making a chirping or whistle sound when it
idles. when i speed up it goes away then returns whent it idles at a
stop sign. i put a few sprays of wd-40 on the alt pulley and the tension
pulley and it stoppes. then return after a hour or so of driving. i`m ...

I have broken a bolt off in the block. It is not the actual exhaust manifold
bolt, but the bolt that holds the smog line up to the block  (right
side)......any ideas about how I can get it out?

Considering buying a 92 GT Convertible.  Had a 96 GT convertible that I
liked pretty well.  Any gotchas that I need to be aware of with the 92
model year.  This one is a 5.0 with an AOD.
Thanks for any feedback....

http://www.workopolis.com/servlet/Content/fasttrack/20050217/RAUTOFORD17?section
=Sales
Ford of Canada's 37 year old president wants to protect
the retail attractiveness of the model.  Same goes for
the Freestyle and 500 sedans.

OK, so here's the official stuff for 2005:
http://www.svt.ford.com/newsSvtSleeves.asp
Out of the whole page, the only hard product SVT is apparently offering
for 2005 is a calendar.  Or did I miss something?

are there places that will buy them or just trash all of it?

HERE's THE CURE
A cool site with aim stuff, tv and games reviews, funny
stuff and more www.freewebs.com/kevin10078

http://www.pro-touring.com/videos/realburn.wmv
Joe
Calypso Green '93 5.0 LX AOD hatch with a few goodies
Black '03 Dakota 5.9 R/T CC

Howdy,
If anyone has a 65/66 convertible with rear seatbelts installed, I am trying
to find out exactly where to mount them. No holes that I can find in my 65,
and I believe that the 66 had holes factory made in the floorpan, so could

The little GT40 head comparision thread got me thinking.  As much as CJ
hates my guts and I can't stand his stuck in the past attitude,
automotively, I think we're quite similar.  So I started thinking about
what we have in common.  I don't have a lot of time tonight to post, so

The signal lever on my son's '80 is broken. It still signals right, but once
it's out of the right turn it just drops down. To signal left it has to be
held down quite firmly. I imagine that it will stop working soon.
What kind of a job is this? Is it something I should attempt on ...

I've been considering adding a cold air intake, and dual exhaust.  It's
my understanding that I also need to add a chip to be able to "tune" the
differences that those modifications will make...
Is this true?

Anybody know of an autoparts dealer who sells the Bosch aftermarket fog
lights?  I need to replace the glass lens & reflector on my motorcycle.
Sounds strange but these were automotive lights modified to fit the
application.  Unfortunately, the bike is over twenty years old and the

Here's the latest on the progress of the Arizona emissions bill.  Again, we
can use all the support we can get!
Arizona Emissions Test Exemption for Collectible Vehicles To be Considered
by Senate Transportation Committee on Tuesday, March 8th.

According to the 2004 Motorcraft Chemicals & Lubricant Catalog, I could use
either:
Motorcraft PTFE Lubricant
PN.............D2AZ-19590-A