Hey group:
My 96 GT has the 16" factory alloy wheels.  I picked up a set of 17"
wheels off of Ebay for a reasonable price.
Any tire recommendations?  245/45ZR17

DOSE ANY ONE KNOW ANY SITE'S ON THE 5.0L CAMMER ENGINE??????

my piston on the rack is leaking, how hard is it re pair

Just click under my sigline. Mix of old and new pics.

What do you guys think of the billet parts you can get for the Stangs?
I kinda like them.
So far, I have the round shifter ball, the emergency brake cover, and
the pedal kit, which is real nice. Next I was gonna get the 3

Hey all,
Well spring is right around the corner even though it's -27 degrees
celcius..........;-)................
I have a 1985 Mustang GT with 219,000km on

I have a 92 GT, starts fine and runs fine for about 5 to 8 minutes. Then it
just quits, If it does refire you have to pump the gas to keep it running. I
know its in the fuel system somewhere,but were?
                                          Thanks Dean.

Yesterday I saw my first 05 Mustang GT on the street. This makes about a
hundred sixes and one V8. Yes, it was a teenage guy driving:)
Al

My 1994 Mustang convertible's driver's side door won't stay open. Apparently
the door check mechanism is worn out. How do I fix this? Is there a spring
that needs to be replaced? Where can I get the necessary replacement
part(s)?

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=5569872897&fromMakeTrack=true
I think this woman stole a chapter from our book (my wife and I). Seeing
something like this helps me to realize that everything my kids do is pretty
much normal...most of the time. If I can figure out ...

I have a 1972 Ford Mustang, 351C-4V, 4-Speed manual with a Hurst
shifter.  There are two wires that connect into the manual transmission
- purple and light green.  I can't find these wires anywhere in the
wiring diagram.  Anyone have any idea what these are?  The reverse

Can you put dual exhausts (safely) on an 04 mustang 6 cylinder?  No one
wants to do it for me.

I have a 1972 Ford Mustang fastback with a 351C-4V Cleveland, 4-speed
manual with a Hurst shifter, and an Autolite 4300D 4bbl carb (D2ZF-AA)
(I don't know the cfm rating).  It currently has stock intake manifold
and cam, but I plan to eventually upgrade it performance.  I was

My ride is a '90 LX 5.0 which I've owned since new.  I have been thinking
about the '05 GT but then again I only drive ~6,000 miles per year (the LX
just went over the 100,000 mark).  So why spend almost $30,000 when all I
want to do is to keep my LX California emissions compliant ...

I have started a blog devoted to the automotive industry.  Please take
a look.  My latest article is "GM: Kill Pontiac".
http://theautoprophet.blogspot.com/