According to my manual, my GT's windows should roll down by holding the
unlock button down. it doesn't work. the dealer said my Premium GT
didn't come with that feature, they said it was made too late in 05.
How do I find out whether or not it'll do it?

 A month or so ago I had a couple of my spark plug wires end up laying
on my headers and getting burned through, which of course caused a bad
driving experience, bucking under accel, etc., I replaced the wires as
soon as I found out that was the problem, I also replaced those 2 ...

I took my car in for an oil change and I just found out that my 2000 Mustang
Gt with 70,000 miles on it has a cracked intake manifold.  Research shows
that this is a common problem and that Ford has been doing everything that
they can to not have a recall.  The original one was ...

Score for the Mustang!
----
NATALIE NEFF
Published Date: 1/10/05

Well I finally replaced the exhaust on my 1985 Mustang GT.  I went from the
old stock system to the following:
Flowtech headers (Equal length long tubes)
Flowtech Off-Road H pipe

Not really, I just wanted to get your attention. I found a funny ebay
auction..
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&category=11332&item=7148388898
&rd=1&ssPageName=WDVW

I don't know if it's just my observation, but it seems that there are
not many "minority" Mustang owners. In my area of North East, it's
mostly young white kids or middle-age rednecks (like me).
Any reason for this? I still feel that for the $$, Mustangs offer a

I just finished installing a Steeda adjustable clutch cable (old one
snapped). Already have an aluminum clutch quadrant. I must say it is VERY
nice. Pedal effort is about 2x less. Feels real good too. Hurray, Steeda!
-Mike

Wonder what the '07 will do...
http://www.nothingelseleft.com/cobra/videos/0-160%20KBcobra.wmv

I came a crossed this site today... has probably been posted in here
before, but just in case...
http://www.mustang.org.au/qld/The%20Bullitt%20Mustang.htm
Pretty neat, huh?  

The check engine light came on. It showed that it's the left O2 sensor.
Does that affect the car performace coz I didn't feel much difference
because I can't pay for a new one and installing it rite now.
thnks

Does an '86 50 oz externally balanced Ford 302/5.0L engine need a 50 oz
imbalanced flywheel AND a 50 oz imbalanced harmonic balancer?
The reason I'm asking is the following. When I bought the vehicle
containing the subject engine, there was a lot of engine vibration. I

 Ok, I need some help. I've recently purchased a "99" 3.8 ltr v6
mustang and I would like to install a cold air intake. The problem ....
Airaid doesn't make one for the car. K&N makes one but doesn't make a
throttle body spacer that will work with there intake and ..... the

66 inline 200 coupe
In the middle of a front suspension upgrade, working on one side at a
time starting with the driver side. Put in the new spring perch, test
fitted the shock and the angle of the new perch is too high on the