Ford - Ford Mustangs in all their flavours

Thread preview

Thread	Last Post	Replies

Refurbished my website. (Much better now)	07 May 2005 01:51 GMT	9
Added new pics with the Grabber stripe kit and changed the format completely. Take a look!! Signature Scott W.
Springs for 1968 coupe?	06 May 2005 23:16 GMT	26
Hey all - I have a 1968 coupe with a 289 engine and 14" rims. It has the "nose up" look that makes me think that the springs are probably not right. I want to go ahead and get new leaf and coil springs for it. I would like to drop it
Have You Been Shaved?	06 May 2005 22:43 GMT	17
> The Holy Bible describes Heaven as a beautiful place with no death, > sorrow, sickness or pain. That'd be my life now then. I have no death, sorrow, sickness or pain in my life right now.
shocks/struts for a 69?	06 May 2005 21:24 GMT	3
whats a good performance/ride choice for a 69 V8 coupe? Im not interested in spending $300 for adjustables. Just a good medium choice. Thanks,
97 cobra low beam heres how	06 May 2005 21:06 GMT	6
check that both bulbs work ...not burnt out check the ground suspect multifintion switch every ford tech has a spare one in tool box for testing
Oil recommendations	06 May 2005 19:58 GMT	1
Anyone recommend an oil for a 1972 351C-4V? I know the oiling system is poor to begin with. It is only for summer driving in Chicago (over 40F). I was thinking either 10W-40 or 20W-50? Any recommendations? How about synthetic or conventional?
Any word on sale date for Mustang GT500 Shelby Cobra?	06 May 2005 19:43 GMT	7
I'm in the market soon for a newer performance car...I've been reading about the new 450+ hp GT500 from SVT. I've read it is a 2006 model...but, haven't been able to find out a sale date for the car. My dealers down in New Orleans area...when asked didn't know a date at
jafar put up or shut up LMFAO	06 May 2005 13:20 GMT	4
On Mon, 2 May 2005 22:26:09 -0400, <japhar81> wrote: >Hehe, I'm friends with one of the VPs at Telus... I think its time for me to >make another phone call. This time, hes getting shut off for more than a >day.
Good Mustang Mechanic New Jersey	06 May 2005 12:40 GMT	2
Anyone know of or can suggest a good mustang mechanic in the South Jersey eastern PA area? Any suggestions appreciated. MD - 97 Triple Black Cobra Convertable
97 Cobra Low Beam Problem	06 May 2005 04:43 GMT	17
I have a 97 Cobra that has had Low beam trouble before and as of today they stopped working altogether. All other lights work but the fogs and the low beams. I have replaced all bulbs as well as the switch. Also, all fuses are fine. Is there a relay under the hood for
Bill Gates versus GM	06 May 2005 04:16 GMT	21
At a recent computer expo (COMDEX), Bill Gates reportedly compared the computer industry with the auto industry and stated, "If GM had kept up with technology like the computer industry has, we would all be
legal advise on a mustang	06 May 2005 01:52 GMT	4
On Mon, 2 May 2005 15:28:27 -0400, "japhar81" <japhar81@gmail.com> wrote: >Actually, I've been saving up for the cobra since like '92. And I emptied my >piggy bank to give them the downpayment.
19" wheels on an '05 mustang?	06 May 2005 01:35 GMT	30
Guys, I'm thinking of putting 19"x9" wheels on my '05, with 1" of rubber... Total will be 20", which should be the same as my 17's with 3" of rubber... Anyone know if they will fit well?
1998 Ford Mustang GT Engine Block Drain Plug Or Plugs	06 May 2005 00:52 GMT	4
Where could I find the 2 engine block drain plugs at (assuming there are 2)? I thought I found one under a freeze plug that had a 5/8" head on it, but I thought the drain plugs were more like the one on the differential. Might someone enlighten me as to where the engine block ...
Two O2 Sensor Questions...	05 May 2005 04:08 GMT	3
I have a 1993 GT that is kicking out a defective O2 sensor code. Are used or remanufactured O2 sensors sold as replacement parts for bad O2 sensors? Is using an O2 sensor from a go-fetch bone yard a good idea?