| Thread | Last Post | Replies |
|
| 2004 GT performance options | 03 May 2005 03:44 GMT | 13 |
what the best way to get more performance from a 2004 GT without breaking the bank? - chip? - exhaust?
|
| Re: 2004 Mustang Convertible Front End Noise | 03 May 2005 03:43 GMT | 4 |
I purchased a 2004 Mustang convertible last Fall and have been noticing a "squeeky" type of sound coming from the front end when I turn the car. Since I do not have another Mustang to compare it too, was wondering if this sound is typical for this make and model.
|
| Touchup on powdercoated wheels? | 03 May 2005 03:25 GMT | 6 |
Have the chance to pick up some powdercoated 18x10.5" wheels for pennies on the dollar ($600 total for a set of 4, with rubber). Only catch is, the guy scraped a curb, and theres a pea-sized chip in the powdercoat. Its not chipping around or anything, but it is silver (looks ugly ...
|
| Production Information needed on a 1964 1/2 Convertible | 03 May 2005 00:57 GMT | 2 |
A friend of mine recently purchased a very early production mustang (March 31,1964) with a Vin of 5F08D106001 . The car was made in Detroit and is a convertible 4 spd car, red on red. We are trying to determine which Mustang it was in sequence. Does anyone have any ideas
|
| Interior cleaning? | 02 May 2005 15:03 GMT | 3 |
I need to clean up the original interior in my '66. Fortunately there are no rips or tears but it's rather faded. Anyone know what's a good strength cleaning agent I can use on the seats that won't ruin them? It needs to be fairly strong. The interior's a
|
| 1968 Fastback frame rail replacement tips | 02 May 2005 05:04 GMT | 2 |
i just bought a 1968 Fastback mustand and I was wondering if anyone had any tips on how to replace the front frame rails. thank you
|
| mustang | 02 May 2005 01:20 GMT | 2 |
i am looking for the firing order for a 94 mustang 5.0
|
| A/C clutch not engaging. | 01 May 2005 23:15 GMT | 3 |
Is there a single most likely cause for the A/C clutch not to engage? Car was parked over the winter and I just noticed this the other day.
 Signature Richard
|
| Platinum Plugs 66 Mustang | 01 May 2005 12:55 GMT | 12 |
I have heard pros and cons about using platinum plugs in my stock 66 Mustang 289 with A/C and auto trans. Should I just stick with Autolite? Any recommendations? Also, I would be interested in recommendations for replacement spark plug
|
| Speedo markings??? | 01 May 2005 12:31 GMT | 6 |
Hi all. Here's a weird one... I've had numerous 5.0s. Love 'em. Today I noticed something I've never seen before... The car is a 93GT, Canadian model.
|
| Speedometer cable | 01 May 2005 03:44 GMT | 2 |
Anyone know where to get a speedometer cable for a 1972 Mustang, 351C, 4-Speed?
|
| Ronaele '05 Eleanor kits | 01 May 2005 02:46 GMT | 6 |
I heard from a fairly reliable source that these kits ARE NOT their design. http://www.ronaelemustang.com/ They get all their parts from Cervini's which is coming out with an '05 Eleanor kit later this summer. http://www.cervinis.com/welcome.html
|