Has anyone with a 68 installed leaf springs from Mustangs Plus in the
last year or so?  If so, how many leafs did you get and with which eye
position?  Also what is the distance from the center of the wheel to
the top of the wheel opening?  I can’t think of a good way of choose

Looking for some advice,
Running a 302 with 9 psi of boost. (not intercooled)
AFR is around 11 from 3500 rpm to 5000 rpm.  I wanted to tune it safe
by making sure I didn't run it lean under boost but I believe I just

T5 bellhousing is covered in fluid as well as both sides of the
exhaust and both cats (hot cats cause the tranny fluid to smoke like
crazy).
Checked the tranny fluid level and all is well so it doesn't appear to

Just wondering if anyone has used any of those pressure washers out there. I
was looking at a 5hp gas unit with 2400psi with different heads to adjust
the pressure. The one I really want is a diesel unit that heats the water,
but it is going to cost me about $2500. So I'm strongly ...

I am getting water leakage when it rains. I can replicate it by either , and
when water run down the windshield (even though new seals installed) or into
air vent, but not into the hood /body panel gaps.  The areas to be sealed
are not very accessible.  Is anyone aware of any ...

Ok, I don't think it's the quadrant itself.. but when I press on the
clutch pedal... if I don't STOMP on it, it makes a "creaking" sound &
is fairly difficult to depress. Last time this happened my clutch cable
snapped. I checked for fraying... none.

There is a Plenum Cover for Sale on Ebay similar to the one on the
Mustang Concept Car.
Has anyone bought or seen one?
How do they look ?

On Mon, 23 May 2005 12:56:06 -0700, "Scott" <shpickering@yahoo.ca>
wrote:

I just got a new 05 Stang.....did own a 2000 Mustang GT.  Wow, the 05 is SO
MUCH better...tighter, better handling, better looking interior, quieter
cabin, and best of all, FINALLY on a Mustang, comfortable sports
seats...very similar to the Corvette.  I had new rims put on ...

i have a 99 mustang gt and i got a 99 cobra motor i need to take the gt
motor and replace it with the cobra motor is there any thing els that i
need to do

How Dare Could America Industrial Property Office Be In Conspiracy With
Jungang International Patent Office To Make An Extravagant
International Crime ?
Currently a Korean party now holds the American patent 4919933, the

I have a 69 Mustang with a 250 6-cyl. I would like to replace that with a
302 V-8. Will it bolt up to the existing 3 speed manual tranny?

Now before you guys go into how street racing is only for morons, drop it
'cause I don't wanna hear it. For the most part I agree with you guys, but
there are some occasions where ya just can't resist it.
My first kill in the '69 Boss clone was this evening. A beautiful raven

Subject: How to Give A Cat a Pill...
1) Pick cat up and cradle it in the crook of your left arm as if holding a
baby.  Position right forefinger and thumb on either side of cat's mouth and
gently apply pressure to

I have a Mustang with a 347 putting out 475hp.  I plan on road racing
this car, no drag racing ever.  I am a driver, not a mechanic, so I
looking for a second opinion.  The shop doing the work on the car wants
to put in a 3.73 gearing.  I was thinking 3.27 would be better for