I was wondering if there was a way to tell if a '99 cobra had the recall
done on it? The one where you get the promised horse power out of it,320
horses as compared to the 275 it get without it.
Thanks,

was there a recall on the 2000? i know there was one on my 97 gt.

My wife recently ready me a newspaper ad about a new car wash soap that
promised "no spots" as the water dries.  As I recall it seemed like it was
from a big name or seemingly reputable company, but I wasn't bright enough
to have her save the ad and have since forgotten who/what ...

I never would have believed how hard it is to find a hood for an '80
Mustang. My son crumpled his and finding a good replacement has been a
pain in the arse. Any ideas where a good replacement might be found?

Do you have to plug the vacuum ports before setting the fast idle? (But why would you, as you have to gun the throttle to expose the nut under the choke, so it can't be running, can it???)  I can't seem to set the damn thing!
Help is appreciated!
Thanks
Brad

My driveway goes over a ditch and when i was leaving I drove the front
right tire off the driveway...the bottom of the front end was then stuck
on the driveway....i managed to back up out of it but scraped the bottom
of the car really bad...now when i turn right the car makes a deep

OK, so I found out that the Lightning engine that I am putting into my 68
coupe was mated up to an E4OD transmission, not an AOD.  So I am wondering
- since it seems like it is going to be a nightmare to get the
Lightning's computer to work correctly without the tranny it is ...

I while back someone posted a link to a site that showed several common
Mustang projects (with detailed pics). Can someone repost please?
Thanks
Mark

I'm rebuilding the stock ft calipers in my '69. What's a good lubricant to
use on the seals that's compatible with brake fluid or should I just use
brake fluid itself? It's not a good lubricant.

Like I mentioned a few weeks ago, I am putting a 1994 EFI 351W engine from
an SVT Lightning into my '68 coupe.  The '68 has power steering, and I'd
like to keep it.  The engine pulled from the Lightning has a PS pump
attached.  Does anyone know how hard it would be to make it work ...

Hi there guys just wondering if anyone can help me , I need the paint
mixture for a 66 Mustang Antique Bronze. as here In Australia No One can
help me ...... :-(
Also would like to know who was the paint manufacterer back then.

Is there a special tool needed to remove the fuel filter on the '04 model?
I replaced the same on a '96 mustang with little effort a few years back.
Thanks.

Have a friend with a 66 Mustang in very good to excellent condition
(restored, I think) but the title -- this is in California, if that
makes any difference -- has "Salvage" on it. He wants to sell the car,
and is concerned about the 'salvage' thing. What impact does that have

I'm trying to remove the 5th gear from the cluster shaft on a '95 T-5.
I am stuck on the synchronizer hub.  It won't come off.
I drove the pin out of the 5th gear shifter fork, and I also removed
the external C-clip from the end of the cluster shaft.  This allowed me

I'm thinking of buying air intake system for my mustang gt 95. I was
looking at eBay and price ranges were from $60 to $200+.
What could be the differences in these sets? Or what is a good system?
Thanks