I'm installing a set of new, quality stock replacement rotors on my '69
mach. What is the best way to keep the "rough" areas from turning rust
brown? I'm not sure if caliper paint rated at 900' will hold up, especially
in the cooling fins area. Plating or buying a plated set of ...

I did a PI head swap on my 97 GT with a 2000 and i need to tune it up a
little and i was looking for a programmer that can do air/ fuel mixture and
a few other things. What are my options?

Peace and health to all,
    I recently came into possession of this car. I know it's the
2.3 L, 4-cyl. engine (not the 5.0 with over 105 horses)...
Unfortunately, there was no owner's manual in the vehicle upon

I have a 89 GT with a 93 cobra motor which was recently rebuilt to a 308
with forged internals. The heads were redone with 202 in. and 195 ex. It
has a 70mm throttle body and egr spacer, gt 40 intake, 24lb injectors, nos
fogger system"not used at the moment", msd billet dist, 6AL, ...

A few weeks ago I posted a problem with a family members 97 V6 A/C not
working. A poster suggested removing the A/C pressure switch and
hitting it a few times because sometimes it can get stuck. Well I tried
that and it did not work, but I noticed that on the switch there are 2

Recently got a 67 fastback and discovered a lot of pressure builds up in the
gas tank.  It is bad even when the tank is only a quarter full.  one day gas
was running out the gas cap when it was parked uphill.  Is there a fix to
vent the pressure problem?  Linda

I'm looking for someone who works for Ford that may be able to answer
some questions for me about the A/X plans and a current Ford vehicle
purchase. Different dealers tell me different things.  Please remove
"remove" from my email address.

I wanted to thank everyone who answered my questions about the Grab-a-Trak
stuff from Mustangs Unlimited.
I wound up buying:
1) Grab-a-Trak Spring and Handling kit (upgraded to the 1-1/8" sway bar

Just got back from a weekend excursion, and while cruising along the highway I noticed a 'rough' vibration in the handling of my '04 V6 between 2500 and 3000 rpms, noticeable only in 3rd and 4th gears, but much more profoundly in 4th gear.  Acceleration also seems to be ...

I am such a tool.  I was looking at Mustangs Unlimited and Mustangs
Plus, and somehow I got the wrong name in my head when I made my
earlier post.
I chose Mustangs Plus over Mustangs Unlimited, and Carl is the guy I

Does the 1991-1993 MAF fuel injection system include a barometric
pressure sensor, or is that only a feature of the earlier MAP type fuel
injection?

My son's '93 has twice now run down the battery, cause is radiator fan
continues to run after switching off the engine. According to the FORD
CD I have, it is controlled by the "Constant Control Relay Module",
which evidently controls other things too.

Is there a separate turn signal flasher on the 66 and if so, where is it
located.
My turn signals just died and the lever on the steering wheel is firm and
locks into place when moved up or down

The Owners Manual calls for 5/30 W. --- But, the Extended Warrenty Requires
an Additive, about 1/2 the density of S.T.P. in Engine & Trans.
 I Want to know what the Clearinces are on the Rods & Mains & Cam Bgs.
are. Compaire them for 5W.Vs. 30 or 40W OIL. Oil Pump Cleariance is in

now....don't laugh at me....maybe somebuddy could use this:
I bought a '85 4 cyl new......in '86 or so I bought a "turbo" cat-back
system.....the 'stang's been gone for 10 years but the system is still
hanging in the garage.