All -
Like I mentioned a while ago, I bought a complete 1994 SVT Lightning EFI
351W engine for my '68 coupe.  It's going in in about a week, but my
mechanic says that he thinks I need to send the wiring harness off to be

Please, where is the flasher unit located on a 1998 Mustang coupe?
r/
Keith

I posted here awhile back about having inherited my fathers Cadillac
Eldorado with a 501 C.I. engine, and I'm still trying to get on top of the
learning curve.  Here is my latest dilemma:  Looking at
the engine heads there seems to be two temperature sensors screwed directly

The interior fan switch now only works on the high setting. Does anyone know
what the cause and fix for this might be. I had a similar problem with a 99
honda civic and it required me to replace a resistor located behind the
glove box. Suggestions greatly appreciated...

On July 4, the IDIOT named "hurc ast"
posted the problem shown below.
It is now 2 WEEKS LATER and even though
he says he knows the answer,

The wife and I are taking our little girl to college in Tampa on July 2nd.
After we get her moved in, we have a 2005 Mustang GT reserved at the airport
Avis on July 6th.  Bwah ha ha ha ha ha ha!  At that time, we also slither
over to the Clearwater beach area for some much better ...

Kinda funny to post this but I recently took my new Mustang in because at
slow speeds when turning i could hear a weird hollow popping noise from the
suspension...now i know i dont know much about cars but it didnt sound right
so i took it in...apparently a few new mustangs have ...

I recently purchased a 67 Mustang and between the hood and the windshiled
is two grilled wells that are clogged with dirt and debris.  What is the
best way to clean this area and the best way to access it to clean?  Any
help is appreciated.  

i just replaced my clutch cable in my 86 5.0 and i need to know if there is
a line to pressurize

Always give your baby the best.
http://toptiergas.com/
Patrick
'93 Cobra

Yup, it's that time. With only 30,000 miles on the clock and two sets of
tires later <grin> it's time for a new set of brakes. Any '03-'04 Cobra
owners got practical experience with aftermarket brakes? Already looked
at all the sites and searched the NG's so I've got some ideas ...

Attended the All Ford Picnic and Mustang round up at the Bellevue Community
College Sunday. This was a well attended meet with a special tribute to
Shelby American. Between 30 and 40 Shelbys, Some of the highlights; The
first 1965 GT-350 Street car 003, the middle production run ...

I have been beating on this one for over 2 months now and still no
luck. I have a 95 GT Conv 5.0 all stock. The problem started one day
randomly where the car was cranking, but it didn't start for 5-10
minutes. I didn't take it quite seriously. This is a long message, but

One reason they gave for setting up
(in Quebec, I think) was the illiteracy
they found in the American South.  Apparently,
there is a real problem with things like reading

Need Help diagnosing unusual problem. 95 Mustang 3.8 (6cyl) began misfiring
on cyl 3. Mechanic said probably electrical. Replaced ignition module,
spark plug, and wire. Still bacfires. Replaced fuel injector. Same thing.
With plenum and throttle body off, compression testor ...