I have a 91 5.0 with a t-5 in a 66 coupe.  I am not having this problem
all the time but it is more frequent now. It seems to be effected by
the cold some how because it did this last winter, summer was fine, and
now its happening again.

I'm a youngin, just started driving and just recently got into cars so
if anyone can help me out it would be greatly appreciated
I have a 98 V6 3.8L 120kmi- basically everything is stock(hard enough
to pay for the car :-P) but anyways since I've been driving it, I've

Driving to work on the freeway this morning the Mustang, when out of
nowhere comes this... thing. Looked like a two foot square piece of
dirty aluminum foil, maybe a heat shield or something dropped off some
old junker. It hit the front driver's side corner and went... who knows

Very satisfying.
There's a spot, on my drive back to work, where the highway goes from two
lanes to four. As we approach that spot, traffic slows a bit and gets a
little heavier.

Notice anything different about me?

Here's an interesting article.
---
GM, Bosch, Stanford University. With all of the hype that hybrids are
getting, people forget that there is a lot of improvement left in the

There are two radio ads running in Toronto making
fun of this stupid Chrysler ad.  One for a sub place,
the other for a car dealership (not Chrysler).
Another "Harley Earl" special bites the dust!!!

Here is the top 10 list:
1) Dukes of Hazzard's General Lee - 1969 Dodge Charger
2) Steve McQueen's Bullitt - 1968 Mustang
3) Gone in 60 Seconds' Eleanor - 1967 Shelby GT500

I have a 1986 Mustang GT with an AOD that will skip gears if I'm too
easy on the throttle.  If I use WOT it will shift 1 - 2 and than bog
down by skipping to Over Drive. Usually happens after the car is warmed
up. I would appreciate any one's imput as to why this is happening.

Anyone know good shops in Northern NJ? I just need someone to weld
subframe connectors.
Thanks
Mark

1 have a 67 stang the exterior color code is "N" according to the 67 ford
shop manual this was not an available color. according to the ford master
parts catalog code "N" is platinum except for bronco. The 68 ford shop
manual and the various i.d. decoder books list this color as ...

Hi group.  Was wondering if anyone could help me with my recent problem.
Just noticed a couple of days ago.
1. When I shut off the car, and leave the key in ignition, the internal
chime keeps going off.  Same one as if the lights are still on when you

I love this car, really, I do.. but it has a little issue that is
getting more irritating as the newness wears off.
On the highway, when I drop it into fourth and floor the throttle, it
revs up and engages just fine, runs wide open for a second or less,

I thought it couldn't hurt to post a query.  We are looking for the
location of a specific Shelby Mustang.  It is a 1967 Blue GT500 #0939
If anyone knows the whereabouts of this vehicle any help would be
appreciated.

I have a 1966 mustang 3 speed straight 6.  If you rev. it high it will run
fine but as soon as you push the clutch in to shift gears or stop  it won't
idle.  My experience with working on cars is very limited.  I was going to
try and change out the Carb.  but it has no identifying ...