I put a set of H&R sport springs in and lowered my car 7/8 inch. These
springs are MUCH stiffer than the stock springs... Now all of a sudden
I've been bitten by the drag racing bug. Now here is my newbieness
shows... With these stiffer springs the front end doesn't come up at

I've got a '97 GT Manual Vert w/ little mods up to this point. She's
been running fine... Started it about a month ago and noticed that it
took a long time to start. then it idled really rough. As I got her
down the road the engine started hesitating/missing then the Check

This pic is from a fark.com Photoshop contest; the theme is "backwards."
http://home.comcast.net/~Grumpus/mustang.jpg

- Max -

I have a 1972 Mustang with a 4-Speed Toploader.  The clutch pedal does
not return by itself all of the way.  After I depress it to the floor
and then remove my foot, the pedal only returns about 3/4 of the way
back.  I have to put my foot under the pedal and pull it back up and

I have a code: Insufficient flow to EGR. Do I need to just clean the EGR?
Replace it?
Any help would be appreciated!
Thank you,

Who are using Autobahn88 Car Accessories Product? Is quality good?
www.autobahn88.com
Kam Kam

just got a set of 255/50/16's for my 88 coupe.... they are awesome! anyone
else running these?

Just bought a 2002 GT Mustang two weeks ago and the second day I had it
when I started it up I got a slight noise at start up. This was done after
the engine sat over night. There is a noise that goes away soon after the
engine warms up. is this noise serious ?? If it is i got a ...

Just wondering if there is a mod to speed up the wiper blade motor? We
had such heavy rains that the blades are not keeping up.
Thanks
Mark

After reading many favorable reviews here, I just ordered the Bullitt
suspension (M5400A).  And while I'm at it, I'm going to install the
Prothane "total kit."  I want to install as much of it as I can on my
own, and then take it to a shop to do the remainder.  My plan is to do

http://sn65.com/
video of startup
http://sn65.com/images/Large%20Images/firing%20it%20up.wmv
7MB

1994 mustang.. i replaced the throttle position switch, adjusted the
throttle screw. still idles between 1500 to 2000 rpms can anyone tell me
how to fix this problem???

Read more than 12,000 new, and older car reviews on the web.
Major magazines, newspapers, websites, all FREE.
http://www.carbuzzard.com

i replaced the throttle position switch and adjusted the throttle screw and
it still idles between 1500 to 2000 rpms.. anyone know how to fix this
problem???

Could one of the fine folks here whom has the ability to check the
history of vehicles run a VIN search for me?
The vehicle, a 2002 Ford Ranger Edge, 6 cylinder, 5-speed, black,
62,000 miles, asking $6,500.00