Are they really any good, or do you just hook one up with your Tornado?
Kate

I have a 66 stang with a 302ci/T5.  I had started the car  and noticed
that the starter was still spinning after the car was running.  I turned
off the key, but it kept running.  After putting the car into 2nd gear
and stalling it out, I heard sizzling from the battery posts.  I ...

This movie was a much better cross country race/chase than
"Cannonball Run."  The opening with the cars racing out of
New York City at 6:00am is worth the disc.
-Rich

I don't like to wear clothes, but when driving a car, it has to be
comfortable and the seats must not be itchy.
Is a Ford Mustang good for driving in the nude?

I had to laugh when the shop assistant asked if I'd mind getting my own car.
He couldn't bring it around front, because he couldn't drive stick.
Now this: http://www.thekansascitychannel.com/news/5022562/detail.html
Makes me feel a whole lot better.

My 2000 GT Convert had the drivers side window 'move'
about 1/3" forward.  My door won't close correctly.
My Brother tells me that the window regulator is
the issue.

I'm installing an MSD-6A in a 1972 Ford Mustang, 351C-4V, manual
4-speed toploader.  I need to connect the small red wire from the 6A to
a +12V switched source (needs to be +12V at the run and start
conditions of the ignition switch).  Any recommendations as to where to

To get off.  At least with a socket wrench.
I don't have an air tool, any suggestions?
-Rich

$480 Can. for Mach-1 brake pads?
-Rich

Our 2005 Mustang GT Premium came with the Shaker 1000 factory upgrade.
We've had two problems with the car that are forcing us to use the
Ford arbitration / Nebraska Lemon Law process.  If anyone else has seen
these issues on the 05 Mustang, please post a reply.

I'm trying to install seat covers. but because the seat belt guide is
bolted to the top of the seat  i need to get the headrests off first.
how???

     This might sound stupid but here goes anyway. I was trying to figure
out what the stock convertible top is made of on a '98 cobra. Is it vinyl,
or canvas, or?
Does anybody have any helpful hints on taking care of it. Your help would be

Sorry to ask such a stupid question, but my son received a 1991 Ford
Mustang GT from his grandmother (my father-in-law had passed away). and
I cannot find the location of the interior hood release. Can anyone
point me in the right direction?

With the high prices of gas lately (you have to get a loan to fill up)
I've gotten into the habit of sometimes coasting down long hills in
neutral. I only do this when I can go the speed limit via this method,
and traffic is light. I was wondering the opinion the masses has on

http://www.compfused.com/directlink/936/