| Thread | Last Post | Replies |
|
| ABOUT AC COMPRESSOR 1994 Mustang Cobra 5.0 | 26 Nov 2005 17:13 GMT | 2 |
I just bought a new AC compressor for my 1994 musgant cobra 5.0. I wanted to know if someone out there is kind enough to guide me step by step as to what do I have to do to install it, if not, if you know of any shop that might install it in the area of Winter Haven, Florida, & ...
|
| Sheetmetal body work question | 26 Nov 2005 08:16 GMT | 1 |
What gauge metal should I use to patch skin on my '66 mustang project?
 Signature Mark --
|
| Funny headlight "film" | 26 Nov 2005 00:01 GMT | 17 |
I've seen some Hondas and Scion-type vehicles lately with some blue-ish plastic film adhered to the outside of the headlight housing. Obviously trying to give their car the "cool blue" look of the HID lights. I had to laugh.
|
| '66 mustang fuse panel ? | 25 Nov 2005 16:47 GMT | 3 |
Just bought the car. The fuse panel is rusty. My instrument panel doesn't get power. Replaced the 2.5a fuse with a 4a fuse, but no power to the gauges. Any suggestions??? James
|
| Transmission whine? | 25 Nov 2005 06:10 GMT | 2 |
AODE - '94 GT. Transmission rebuilt 2 years ago. Fairly loud whine in 1st, slight in 2nd and OD. Swapped out the planetary gear set. No significant change. Internals all looked good. Transmission mounts look good but are probably original. Rear differential carrier bearings, crown ...
|
| PING-> Spike! | 24 Nov 2005 19:04 GMT | 1 |
Hey Spike! Your email is bouncing.... So, hugs to you and Pookie on Turkey day. Kate
|
| Happy Thanksgiving all | 24 Nov 2005 16:05 GMT | 2 |
I hope you all eat too much. Cobraboy '98 convert
|
| Replacing Cold air intake on a 2002 3.8 L Mustang | 24 Nov 2005 04:36 GMT | 3 |
Just bought a new cold air intake for my 02 mustang 3.8 L but it didnt come with any **DUMMY** instructions. What I need to know is, there is a wire that runs inside the intake plastic housing just before the filter on the stock unit. #1 What is this.
|
| 1997 Automatic sticking? | 23 Nov 2005 23:53 GMT | 3 |
I have a 1997 automatic ford mustang and latly the sift stick has been sticking in park and sometimes it takes up to a half hour before I can get it out of park. I was wondering if anyone else had this problem or if anyone knew what it could be and what I could do to fix it? Thank
|
| 92 GT Vert as daily driver? | 23 Nov 2005 19:49 GMT | 7 |
I have a 92 GT Vert manual (107K miles) as my daily driver, but I have never owned a car this old and my wife and friends are encouraging me to sell it. How much longer can I realistically plan to drive this car as my
|
| Clockspring | 23 Nov 2005 19:29 GMT | 2 |
Just replaced a 1990 LX clockspring.Part has been superceded to F2CZ14A664-B. Dont quote me on #.Part has been redesigned and no longer uses the little spring and pin arrangement with the 3 separate tracks.Be aware it calls for a new bearing retainer plate so wires to the new ...
|
| 05 Brake Problems? Crashed mine yesterday. | 23 Nov 2005 00:18 GMT | 8 |
Yesterday driving my new 05 convertible pretty low speed through residential neighborhood a car in front of me stopped short, I stomped on the brakes hard, expected screeching tires, but instead it felt like either a gradual slowdown or maybe no slowdown and I rearended them. I
|
| 05 Gas Filling | 22 Nov 2005 21:16 GMT | 5 |
Does anyone else have this problem with an 05 Mustang gas tank. Whenever I get gas, it takes forever as the pump keeps cutting off like the tank is full. Is it must me or does anyone else have this
|
| Horn Relay -- How to test? :-) | 22 Nov 2005 16:40 GMT | 1 |
My brain is done like dinner today. I forget how to test realy. :-(
 Signature Shawn McClelland smcclell@rogers.com
|
| GM: 39,000 job cuts, 9 plants closing | 22 Nov 2005 02:04 GMT | 5 |
Time for better management, perhaps? Oh yes; Thanks to all Americans who sent their dollars overseas so they didn't have to feel bad telling their neighbours they bought an American car.
|