Are those things removeable or are they integral to the lamps?  I think
they would look a lot better with the covers gone, like the old
Mustangs.  Just wondering, thanks...Frenchy

I am a bit confused.  Are all Shelbys Mustangs?  Or does Shelby make cars
called Shelbys that are not Mustangs?
Thanks!

I'm selling two pairs of seats and used tires from my '90 5.0 LX. Located in
South Austin, contact info is in the Craigslist ads~
Mustang Seats -tan leather, power driver: Mustang power seats from a
'93-ish. (Rumor has it that they may actually be from a 94-98) Tan leather,

I seen a radar detector on EBAY the  PNI Traveller RX7000 Radar
Detector, brand NEW for $58.50 (on ebay) and was wondering if this is a
good price for the battery operated unit. and If this this a Good
detector to useThanks

http://www.steeda.ca/catalogue_product_768.asp
Here in Northern NJ, I have never seen a Mustang on a street with a
roll bar. Soon I will give my 2K GT  'vert to my son who is about to
get his license and wanted to make it a bit safer.

Has anyone ever changed the light bulb in their 2001 Mustang GT fog
lamp?  I have a bulb that burned out, and it needs to be changed.  I am
not very good with tools, but I wouldn't think it would be that
difficult.  What steps are involved?  I don't have a lift or ramps to

I ordered new bushings for my clutch support bracket and they don't
have a  slotted straight edge like the originals. Can I just mig weld
these in place? Otherwise every else fits nice....

what exactually does this do? i have a mustang that loses all pressure to
the engine and starts knockin. i replaced the oil pump and the pickup
tube, what else could it be? it only knocks when the oil pressure drops so
it wouldnt be the rod barrings or it would do it all the time, ...

I saw one yesterday on a Wrangler that really cracked me up.
On the front fender, just beneath the JEEP logo it read
"H2 Recovery Team"
Kind of like this:

What's a good sealant to use on my '66 drip rails I just stripped and
treated? I used to use aircraft "Pro-Seal" but it's pretty costly. I'm
prepping the car for the paint shop.

Dear friend:
      I'm sorry!Take up your valuable time !!If you are a retailer of
sports shoes or whole seller !!We will become your newest supplier!!
      We are a sports shoes trading company of experience for many

Brands picked for narcissistic reasons
French researchers say we pick certain brand names for an entirely
narcissistic reason: they contain letters of the alphabet that are in
our own name.

I'm planning on installing a new diff over Thanksgiving weekend. I'm
going to buy a "drop out" unit which comes with a third member, a
Detriot Tru-Trac diff, and a new ring and pinion (with my choice of
gear ratio) all pre-assembled and ready to be installed. Its going in

I'm considering ordering an '06 GT.  I heard a Shaker system in an '05,
and I really didn't think it sounded very good.  I'll probably go with
aftermarket equipment.  I was wondering if there are any other
alternatives.  The sub box itself seemed OK, but I'm thinking custom

Anyone had any experience with Ford Racings 351 crate motor, the one they
say is HD. 250 hp,4bbl intake, and cost $2,800? Thinking of putting one in
my 71 coupe, the Ford parts website says it makes 350 ft lbs of tq. I would
like alittle more hp than 250 say around 300, but this ...