| Thread | Last Post | Replies |
|
| Here's a nice older car | 02 Nov 2005 06:30 GMT | 16 |
http://www.pbase.com/andersonrm/image/51484861
|
| 1990 Mustang AOD Problems | 02 Nov 2005 05:57 GMT | 7 |
Found an interesitng solution to what I thought was a dying AOD. Had a battery problem with the car. First off, let me tell you SEAERS SUCKS. Bought a 100 month Die Hard battery for my 1990 Mustang in (roughly) summer of 2000. Misplaced the receipt. Sears keeps records of every DUMB ...
|
| Used head 1990 Mustang - Opinions/advice | 02 Nov 2005 01:50 GMT | 3 |
I went to one of the local jobbers I deal with to see if they had a rebuilt head for my 1990 Mustang. They did not have a rebuilt remaining in stock but after a few calls offered a salvaged one with roller cam "complete and ready to go" for $175 Can ($150 US).
|
| Costco tires for GT | 01 Nov 2005 14:53 GMT | 6 |
Need good all-season tires. Can someone advise from the following list for the best option. http://www.costco.com/Tires/SearchResult.aspx?IV=true&YW=2000&MA=FORD&MD=Mustang +GT&SP=0&MN=1117&cat=3962&MNo=0 Thanks in advance.
|
| Ebay Kenne Bell SC auctions deleted | 01 Nov 2005 14:03 GMT | 1 |
If you search 'kenne bell' on ebay, and find the supercharger kits at auction, they are all deleted; here are a couple of examples; http://cgi.ebay.com/Kenne-Bell-Supercharger-for-99-04-Mustang-4-6-2v_W0QQ
|
| Just once, I figured | 01 Nov 2005 13:46 GMT | 55 |
I'm coming home, on the 401 in the Toronto area and some clown in a XK8 comes roaring up behind me. He must have done something with his engine because I actually heard it. I was innocently doing about 110kph
|
| Replacing timimg chain cover gasket/seal 1997, 3.8..... | 01 Nov 2005 03:27 GMT | 1 |
Am at a point where i am a little overwhelmed. The book tells me to find TDC, yet is very vague on the procedure. It first told me to remove the crankshaft vibration damper. Then it tells me to, after installing a compression gauge in cylinder #1, turn crankshaft clockwise with a ...
|
| 2006 Grinding? | 01 Nov 2005 03:03 GMT | 6 |
I too have a 2006 GT automatic Mustand and I'm noticing this slight grinding sound. I'm not sure exactly how to describe it. I don't seem to notice it while driving on the highway or faster speeds, but I do seem to hear it when idle at a red light or sometimes driving slower ...
|
| Sticking valve? | 01 Nov 2005 01:53 GMT | 10 |
I have a 1972 Ford Mustang, 351 C, 4V. It has the open chambers and hydraulic lifters. Never had a valve job, so cam and valves are original. Only has 32,000 miles. When running, there is a "ticking" noise coming from the number 8 cylinder. Sounds like its valve
|
| 67 cougar | 01 Nov 2005 01:36 GMT | 8 |
Any info on which vehicles would be the best donors for a front disc brake swap for a 67 cougar? Mr ECW
|