Hey all,
I've got a 1993 5.0 LX and am looking for a 12V @ 1A "keyed" power source.
I tapped into the cigarette lighter for now, but it's always on.  I would
like a power source that I can find or create so that I can have my XM turn

My friend has a 84' 5.0 GT convertible that somebody reversed the headrests
and the seatbelt brackets are on the wrong side. We have tried pulling them
straight up but nothing seems to work. Hope someone in the group can help.

OK, I have what I thought was a simple question, but none of the dealers
that I talked to, nor the Ford 800 number can answer it.  So hopefully
someone out in Cyberland can.
I'm going to be buying an '06 GT Convertible, and I'm currently doing

Would anyone happen to know of a good inexpensive engine rebuilder in the
San Diego area?  I have a 66 mustang that I just completely rebuilt the top
end on and now I am getting a massive amount of blow by on my bottom end and
new to get the bottom rebuilt (or at least new rings ...

i have question for you. what do you knov about uckermann ratio. please
give me detail.
thanks..
veli

I have a 2004 Mustang Convertible.  I have only 1 keyless remote.  Do I
have to go to the dealer to get another copy.  I want to have a spare.
Any help is appreciated.  Thanks.  Can I buy some remotes on ebay and
let the "dealer" program for me as this may be cheaper than buying the

It's been a long time coming, but now it's finally happened. Yes, I actually
sat in a Mustang built after 1993.
http://www.tfrog93.com/020806a.jpg
My wife's lease will be up on the Escape soon - that's the excuse for going

I've got an 02 Mustang GT Premium, but I apparently blew one of the amps
for the Stock Mach Audio System.  Does anyone happen to have one I can buy?
Please email me if you do.
~Alf

That the new Challenger was NOT at the Canadian International Auto
Show.
Apparently, the Chicago show is alot larger, is on now and that is
where Chrysler's

Something to think about next time you decide to build one of your own.
This was posted in another group, it has a pretty high WOW factor.
http://www.fototime.com/7EFC0B87ED3EDDE/conv.wmv
Just watching it makes me cringe. Can you just imagine what it was like

I want to remove the dash gauge cluster from my 2002 V6 Mustang ragtop but I
can't get the headlight switch knob off.  The aftermarket manual I have says
to use a small screwdriver to press the tab in the slot of the knob shaft
and pull; and there is a slot in the knob shaft with ...

i have a 1993 lx coupe w/ a 306 now under repairs i want to know if the 4.6
single overhead cam  will fit in this model mustang

I am still bouncing off your spam traps!!
You sent me something to this particular addy yesterday.

Had the very first non normal repair on my 99 stang last week.  For
some reason, the wipers wouldn't come on.  Checked the fuse, relay
etc.  Could hear it clicking but couldn't find out why the wipers
wouldn't come on.  Dropped it off and they called me back a few hours

Does anyone have the link to the '07 Cobra's that you can select the color
combos with the stripes to see the possibilities? I remember seeing it
sometime ago and would love to try it out again. Thanks!
Nick