| Thread | Last Post | Replies |
|
| Rumours of massive "plot" re: Ethanol | 15 Feb 2006 20:34 GMT | 3 |
The push is on (by the oilman president, no less) to adopt Ethanol (derived from corn) as a gasoline subsitute. But, as it turns out, the massive agribusiness lobbies
|
| 95 Mustang GT won't start sometimes | 15 Feb 2006 02:33 GMT | 2 |
This Car is driving Crazy. Sometimes it will Start and Run good and sometimes it won't start at all I've had it towed to the shop Twice and when it got there it started right up. Sometimes it will die and wont start back up for awhile. I had the fuel pump and filter replaced, the
|
| Resto-Mod Modification Recommendations. | 14 Feb 2006 23:40 GMT | 2 |
I have a 1969 Mach 1 (always a "work in progress"), it has a 351W, c/r 4-speed and a locker rear end. After spending last summer doing new torque boxes, floor pans etc. I am ready for this summer.... I currently have, actually the Mach 1 currently has manual steering
|
| 88 mustang radio install - no sound! | 14 Feb 2006 06:51 GMT | 7 |
Hey all! I've done a few google group searches and I am a bit confused as to my problem, but I think I am getting closer to the solution. I have a cd player, 88 mustang, and a wiring harness from walmart. When it is all hooked up the radio comes on just fine but no sound
|
| 93 2.3L issues | 14 Feb 2006 06:33 GMT | 7 |
Put new plugs in the day before yesterday. Got done, car ran good for about 15-20 miles. Stopped for a minute to wait on my son, when I restarted, the idle was very rough. When you step on the gas, it is very sluggish and rough, then smooths out as the rpms climb above 1500. I ...
|
| question concerning reading codes..... | 14 Feb 2006 06:23 GMT | 4 |
93LX with the 2.3 has intermittent CEL. Runs fine, good though. Does the light have to be on to read the code or does the computer store a history? Afriend has a reader, I just need to go borrow it (he has a T-bird of same vintage).
|
| Info on release of 07 Cobras? | 13 Feb 2006 06:35 GMT | 1 |
Does anyone know when the 07 Cobras will be released? Will the 07 Cobra convertibles be released this year or in early 08? Thanks if you can help, - JA
|
| Brake upgrade recommendations | 13 Feb 2006 06:02 GMT | 5 |
My front rotors have been turned for the last time and I'm thinking of upgrading to larger rotors so I am wondering if anyone has any recommendations. Some background info to keep in mind: '95 3.8L convertible, auto
|
| Pics of my '88 5.0! | 12 Feb 2006 23:28 GMT | 4 |
I finally got the stereo installed and put back together. I took some pics for you to see. I'll just post the links cause I figure you don't want the binaries in here, lol. Let me know if you cannot access those pictures. '88 5.0 lx convertible, 98k original miles.
|
| Windshield Washer spout | 12 Feb 2006 14:26 GMT | 2 |
How does one get to the passenger side window washer spout to see why it is not "spitting". 99 Mustang
|
| Problems with a '97 | 12 Feb 2006 07:48 GMT | 1 |
Well, I'm having many problems with my '97 right now, but there are two issues that I was hoping to get help with: 1. Does anyone else ever get the extreme fluctuations in RPM after starting the car? This happens only when the temperature is low. This
|
| Question about intermittent wipers | 12 Feb 2006 05:47 GMT | 4 |
One of the features I miss most on the '80 Capri I just bought is intermittent wipers. Now I have access to a wrecked '85 Stang that has them. I know I have to change the switch and wiring harness. That part is easy.
|
| Out of round tires??? | 12 Feb 2006 05:08 GMT | 3 |
My 67 mustang 390 was sitting on the tires for about a year and 1/2 and when I finally took it out there seems to be a lot of bumping about the tires. Will this condition eventually disappear or is new tires the remedy.It has oversize Dunlop radials on it now.Thanks for any ...
|
| Cigar Lighter blowing fuses | 12 Feb 2006 02:59 GMT | 11 |
My 1972 Mustang Coupe likes to blow fuses. I bought a new lighter and element installed them, after cleaning all the rust and filth, when I push the lighter in the fuse blows. I've run continuity between the power and ground, ground is good and the power only
|
| mustang billet fuel door. | 12 Feb 2006 02:57 GMT | 3 |
Best billet fuel door on the market with 100% CNC machined. Just want to introduce to all mustang lovers and fan clubs my new site where I sale the billet products. Hope you guys stop by and suport me. Thanks. www.koolstang.com
|