See my previous post : Loose trans mainshaft. Car in question is 99 v6 AODE
'vert.
Well I was able to get under there and replace the bearing and seal today.
The whole job took about an hour. We had to turn down a seal puller 20

When I installed long tube headers on my '66 coupe with a 289 I noticed
popping sounds in the exhaust when I would decelerate in gear.  It has
grown slightly worse and now also does it when I am driving at a
constant speed in town.  What could cause this?  I have changed

Ok fellers, here's the deal.
I have a few things left over from my 98 SN95 Cobra
I have a used Mach 460 Stereo and CD player. I got them from someone else
here in the

I realize that these cars are not currently available but does anyone here
know any SVT dealers that abide by a 'no-markup' policy?
Looking to order & purchase the new SVT Shelby GT 500 without paying a 20k
markup. Any ideas?

I know the VIN is on a shiny strip under the driver's window. Is there
anywhere else it is stamped in?

i ve serously damaged the front of my mustang 2002 GT convertible
is it possible to take the opportunity to repair and exchage with a
2005 front a.s ( hood , fenders , grill, bumper) even there are
modifications

99 V6 AT(AODE) 'vert, 120k miles.
I've been hearing a *clunk, clunk, clunk* from the rear of my car on
deceleration / coasting. Can only really hear it below 35mph, or when barley
giving it gas at about 45mph. Checked the u-joints and they were fine, but I

I have a 1998 Mustang GT that the factory alarm triggers randomly and
for no apparent reason.  Just this morning it went off AGAIN and we had
a neighbor in our front yard already complaining about it- this time.
So I desperately need help and suggestions in what to do to turn this

It is with sadness that I have to report that I sold my 03 Cobra.
I spotted this really nice M3 (go ahead, flame me) and thought I'd try
to sell the Cobra. I put the price down way above blue book and it
actually sold within a week ! I drove it for a little over 2 years and

anyone want a shifter from a 2003 svt cobra 6 speed ? I replaced mine
at 4K miles so it's like new. Sold the car, so no chance of ever
putting it back again.

Not sure if my topc is the best but was wondering:
Whats the best thing to use to protect and shine the convertible canvas top?
Preferrably something that can be purchased at autozone/advanced
auto/napa/o'rileys/walmart.

What recommendations can I get for a system for my Mustang.   X or H
pipe or the MAC direct bolt on system that goes on the stock Y pipe.
I'm looking for the best bang for the buck for performance and sound.
Thanks

we have a discussion here in our community (www.dr-mustang.com) if our
Mustangs are well protected against corrosion / rust. Some specs leave us
with the idea that all body is made of galvanized steel and therefore
corrosion protection is ok. Others look onto from below and see" ...

Hi,  I wanted to see what everyone's recommendation was for the best
supercharger for an 06 or 07 Mustang.  Originally I got on the list for a 07
Shelby GT500 (number 19) but just recently learned from my dealer and
several other local dealers that Ford has decided to limit ...

Finished up some metalwork on a Mustang restoration I have been
working on.  I blasted/primed all the suspension, frame rails, etc.
Basically totally metal from bumper to bumper across the bottom.  
Heres the question:  What color was the engine bay and suspension